Aeotec Manuals & User Guides

AeoTec Smart Switch 7 F Plug Aeotec Smart Switch 7 (F plug) (http://aeotec.com/z-wave-plug-in-switch) has been crafted to power connected lighting using SmartStart, S2 framework, and Z-Wave Plus (http://aeotec.com/z-wave-plus). It is…

AEOTEC SR-ZV9032A-EU Z-Wave MultiSensor User Manual Important: Read All Instructions Prior to Installation Function introduction Product Data Radio Frequency 868.42 MHZ (EU) Power Supply 3VDC (2*AAA Batteries) Temperature Range and…

AeoTec Nano Shutter Aeotec Nano Shutter. Aeotec Nano Shutter is a Z-Wave motor controller specifically used to enable Z-Wave command and control (up/down/stop) for existing window covering motors. It can…

Dual Nano Switch Dual Nano Switch IMPORTANT! This product has been fully tested and certified to work with Z-Wave by the Z-Wave Alliance. It is crafted using Z-Wave Plus, the…

AEOTEC Z-Stick Gen5+ USB Controller User Guide https://aeotec.com/z-wave-home-automation/z-wave-smart-start. The technical specifications of Z-Stick Gen5+ (https://aeotec.freshdesk.com/a/solutions/articles/6000242203) can be viewed at that link. Get to know your Z-Stick 'C' LED Indications LED…

ZW141-C Nano Shutter User Guide ZW141-C Nano Shutter Aeotec Nano Shutter Aeotec Nano Shutter (https://aeotec.com/z-wave-motor-shutter-curtain-control) has been crafted to power connected sockets and switches using Z-Wave Plus (http://aeotec.com/z-wave-plus). It is…

AEOTEC EZW096 Smart Switch 6 Aeotec by Aeon Labs Smart Switch Aeotec Smart Switch 6 is a low-cost Z-Wave Switch plug-in® module specifically used to enable Z-Wave command and control…

Z-Stick 7 user guide. Modified on: Tue, 29 Jun, 2021 at 1:11 PM User Guide Z-Stick 7 Z-Wave Plus USB Antenna Z-Stick 7 was developed to control actuators and sensors…

Aeotec Z-Wave Plus Smart Switch 7 Aeotec Smart Switch 7 (F plug) (http://aeotec.com/z-wave-plug-in-switch) has been crafted to power connected lighting using SmartStart, S2 framework, and Z-Wave Plus (http://aeotec.com/z-wave-plus). It is…

AEOTEC MultiSensor 7 Aeotec MultiSensor 7 was developed to detect ambient values and movement and to transmit them with Z-Wave Plus (http://aeotec.com/z-wave   (https://aeotec.com/z-wave-home-automation/zwave-gen7.) technology. You can find out more…