CASIO-logo

CASIO HK-W Analog Watch

CASIO-HK-W-Analog-Watch-product-image

Product Information

Specifications

  • Model: MA0801-EA
  • Operation Guide: ANALOG (HK-W)
  • Supported Modules: 1362, 1398, 1770, 2799, 3378, 4370, 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049, 1782, 4328, 4747, 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, 4746, 709, 1333, 1347, 3716

Instructions for use

Your watch may differ somewhat from the one shown in the illustration.

[Modules 1362, 1398, 1770, 2799, 3378, 4370]

To set the time
Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping.CASIO-HK-W-Analog-Watch-image (1)

[Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049]

To set the time

  1. When the second hand is at 12 o’clock, pull out the crown to stop it.
  2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting.
  3. Push the crown back in on a time signal to resume timekeeping.

CASIO-HK-W-Analog-Watch-image (2)

[Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044]

To set the time

  1. When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.
  2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting.
  3. Push the crown back in on a time signal to resume timekeeping.

To set the day
Avoid setting the day between 8:00 p. m. and 2:00 a.m. The day may not change in the following day if you do.

  1. Pull out the crown to the first click.
  2. Set the day by rotating the crown.
  3. Push the crown back in to its normal position.CASIO-HK-W-Analog-Watch-image (3)
[Modules 709, 1333, 1347, 3716]

To set the time

  1. When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.
  2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting.
  3. Push the crown back in on a time signal to resume timekeeping.

CASIO-HK-W-Analog-Watch-image (4)

To set the day and day of the week
Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do.

  1. Pull out the crown to the first click.
  2. Set the day by rotating the crown counterclockwise.
  3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected.
  4. Push the crown back in to its normal position.

To set the day and day of the week
Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do.

  1. Pull out the crown to the first click.
  2. Set the day by rotating the crown counterclockwise.
  3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected.
  4. Push the crown back in to its normal position.

[Days of the Week]

English Spanish
SUN DOM
MON LUN
TUE MAR
WED MIER
THU JUEV
FRI VIER
SAT SAB

For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand.
After certain amount of time elapsed, read the graduation on theCASIO-HK-W-Analog-Watch-image (5) elapsed time bezel which the minute hand points to.

The elapsed time is indicated.

CASIO-HK-W-Analog-Watch-image (6)

  • Some water resistant models are equipped with a screw lock crown.
  • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns.
  • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting.

CASIO-HK-W-Analog-Watch-image (7)

Frequently Asked Questions

Q: How do I change the day and day of the week settings?
A: Depending on your module type, follow these general steps:

  1. Pull out the crown to the first or second click based on your module.
  2. Set the day by rotating the crown counterclockwise and the day of the week clockwise.
  3. Confirm the language selection (English or Spanish).
  4. Push the crown back in to its normal position.

Documents / Resources

CASIO HK-W Analog Watch [pdf] User Guide
1362, 1398, 1770, 2799, 3378, 4370, 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049, 1782, 4328, 4747, 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, HK-W Analog Watch, HK-W, HK-W Watch, Analog Watch, Analog, Watch
CASIO HK-W Analog Watch [pdf] User Guide
1362, 1398, 1770, 2799, 3378, 4370, 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049, 1782, 4328, 4747, 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, HK-W Analog Watch, HK-W, Watch, HK-W Watch, Analog Watch
CASIO HK-W Analog Watch [pdf] User Guide
MTP-V006D-7BUDF, 1362, 1398, 1770, 2799, 3378, 4370, 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049, 1782, 4328, 4747, 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, 4746, HK-W Analog Watch, HK-W Watch, Analog Watch, Analog, Watch
CASIO HK-W Analog Watch [pdf] User Guide
MTP3050D-2AV, 1362, 1398, 1770, 2799, 3378, 4370, 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049, 1782, 4328, 4747, 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, HK-W Analog Watch, Analog Watch, Watch
CASIO HK-W Analog Watch [pdf] User Guide
MTP1183E-7A, Modules 1362, 1398, 1770, 2799, 3378, 4370, 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049, 1782, 4328, 4747, 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, HK-W Analog Watch, HK-W, Analog Watch, Watch
CASIO HK-W Analog Watch [pdf] User Guide
1362, 1398, 1770, 2799, 3378, 4370, 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049, 1782, 4328, 4747, 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, HK-W Analog Watch, HK-W, Analog Watch
CASIO HK-W Analog Watch [pdf] User Guide
HK-W Analog Watch, HK-W, Analog Watch, Watch

References

Leave a comment

Your email address will not be published. Required fields are marked *