SR-CS2836D5 RGBW Push Plus Rotary Knob Smart Remote
“
Product Information
Specifications:
- Protocol: Casambi
- Operation Voltage: 3VDC (CR2450 battery)
- Transmission Frequency: 2.4GHz
- Transmission Range (free field): 30m
- Dimension: 58x20mm
- Waterproof Grade: IP20
Product Usage Instructions
Function Introduction:
- 4 scenes: Click to recall the scenes created on the Casambi
app - Rotary knob to adjust brightness/color temperature/RGB
color - Click to turn on/off. Double-click to switch between
brightness, color temperature, and RGB modes - LED Indicator: blinks once for brightness, twice for color
temperature, and three times for RGB mode
- Open the Casambi app and add the remote to your Casambi
network. - In the Switches view, configure button functions:
- Push button 1 controls the center button, choose luminaire or
group control - Push buttons 2-5 correspond to scenes 2-5, assign scenes in the
app
- Push button 1 controls the center button, choose luminaire or
- After configuration, both remote and app can control the
lighting.
Replace Battery:
- Use a screwdriver to open the battery cover.
- Replace the battery and reinstall the cover.
Installation Bracket:
- EU Standard Size Bracket:
- Method 1: Stick 3M glue on the back and attach to the wall
- Method 2: Screw the bracket to the wall
- Method 1: Stick 3M glue on the back and attach to the wall
- Method 2: Screw the bracket to the wall
FAQ (Frequently Asked Questions)
Q: How do I configure scenes on the Casambi app?
A: To configure scenes, open the Casambi app, go to Scenes view,
and create new scenes by selecting luminaires or groups and
adjusting settings.
Q: What should I do if the LED indicator does not blink as
expected?
A: Check the battery connection and ensure it is properly
inserted. If the issue persists, consider replacing the battery
with a new CR2450 battery.
Q: Can I use this remote with other smart home systems?
A: The Casambi Push + Rotary Knob Smart Remote is designed for
use with Casambi networks and may not be compatible with other
smart home systems.
“`
Casambi Push + Rotary Knob Smart Remote
Important: Read All Instructions Prior to Installation Function introduction
4 scenes: Click to recall the scenes created on the Casambi app
Rotary to adjust brightness/color temperature/RGB color
Click to turn on/off. Double-click to switch between brightness, color temperature, and RGB modes.
LED Indicator: blinks once when switched to brightness, twice for color temperature, and three times for RGB mode.
Product Data
Protocol Operation Voltage Transmission Frequency Transmission Range (free field) Dimension Waterproof Grade
Casambi 3VDC (CR2450 battery) 2.4GHz 30m 58x20mm IP20
· Casambi smart remote · Enables to control single color/CCT/RGB/RGBW/RGB+CCT lighting device · Can be configured and controlled by Casambi app · Typical mesh range is over 50 meters line of sight for indoor environment · Battery powered remote with low power consumption
Configure push button function via Casambi APP Step 1: Open the Casambi app and add the remote to your Casambi network. After a successful addition, the remote will be shown in the Switches view.
Step 2: In the Switches view, tap the remote to configure its button functions. Five push buttons are available for configuration: Push button 1 corresponds to the center button of the remote, and you can choose to control either a luminaire or a group in the app. Push buttons 2-5 correspond to scenes 2-5 of the remote, and you can assign a scene to each button in the app.
Step 3: After configuration, both the remote and the app can control the lighting.
Note: Please refer to the Casambi App User Manual for more detailed instructions if needed.
Replace Battery
1. Use a screwdriver to open the battery cover
Installation bracket 1. EU standard size bracket
1
2. Remove the battery cover 2
Method 1:Stick 3M glue on the back of the bracket and then stick the bracket to the wall
Method 2:Screw the bracket to the wall
3
4
Magnetic
3. Replace the battery and reinstall the battery cover
2. US standard size bracket
1
2
Method 1:Stick 3M glue on the back of the bracket and then stick the bracket to the wall
Method 2:Screw the bracket to the wall
3
4
Battery Warnings & Safty Warnings and Statements:
This product contains a CR Coin Cell Lithium Battery and meets the requirements of the 16 CFR Part 1263. For your safety and to ensure proper operation, please carefully read and understand the following warnings and statements.
Statements:
· INDOOR USE ONLY · Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate. · Even used batteries may cause severe injury or death. · Call a local poison control center for treatment information. · Do not install any battery other than CR2450 or its equivalent. · Ensure the CR2450 operates at the nominal battery voltage (3VDC). · Non-rechargeable batteries are not to be recharged. · Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns. · Ensure the batteries are installed correctly according to polarity (+ and -). · Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries. · Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations. · Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children. · If the battery leaks, do not touch or smell it, wipe the leakage from the battery compartment, and then replace the battery with a new one. · If a battery leaks and the material contacts your skin or clothing, flush the exposed area thoroughly with running water. In case of eye contact, flush thoroughly with copious amounts of clean running water and seek immediate medical assistance.
Battery information:
Battery CR2450
Battery Type Button Cell
Operation Voltage 3VDC
Diameter 24.5mm(0.965inch)
Disposing of used batteries:
· When disposing of used batteries, please comply with governmental regulations or environmental public institutions’ rules that apply in your country/area. · Note and follow the STATEMENTS in WARNINGS AND STATEMENTS.
Documents / Resources
 |
Casambi SR-CS2836D5 RGBW Push Plus Rotary Knob Smart Remote [pdf] Installation Guide SR-CS2836D5-RGBW, SR-CS2836D5 RGBW Push Plus Rotary Knob Smart Remote, SR-CS2836D5 RGBW, Push Plus Rotary Knob Smart Remote, Rotary Knob Smart Remote, Smart Remote, Remote |