MIB-3 CVBS Camera Video Interface
“
Product Information
Specifications:
- Compatible with: Audi, VW, Skoda, Seat, Ford, MAN MIB-3
- Model: AHD/CVBS Camera Video interface Art. 300 329
- Screen Compatibility: 8.8, 10.x, 11.6, 12.9, 13 inch
screens - Video Inputs: 4 (Rear, Front, Left, Right camera inputs)
- Video Compatibility: AHD/CVBS (PAL, NTSC, 720P NTSC, 720P PAL,
960P NTSC, 960P PAL, 1080P NTSC, 1080P PAL) - Installation: Behind the radio/navi head unit
- Features: Parking guidelines + PDC for rear camera (CANbus
dependent)
Product Usage Instructions
1. Connection:
Ensure display connections remain original.
2. Dip Settings:
Configure the DIP switches for various camera inputs and OEM PDC
positions as per the provided instructions.
3. Trigger Wires:
Connect trigger wires to activate specific camera inputs based
on the provided guidelines.
Access and adjust various settings such as brightness, contrast,
position, trigger modes, input sources, and guideline options using
the MENU button.
5. Rear Camera Settings:
Adjust settings related to the rear camera input including
brightness, contrast, position, trigger modes, input sources,
guideline options, and dynamic patterns.
6. Front Camera Settings:
Customize settings for the front camera input including trigger
time and input sources.
FAQ
Q: Do I need to connect the Trig-Rear wire for activating the
rear camera?
A: Usually, the reverse function is detected by CANbus, and
connecting the Trig-Rear wire may not be necessary.
Q: How do I adjust the position of guidelines on the
screen?
A: Use the Guide-PosV, GuideL-PosH, and GuideR-PosH settings to
adjust the vertical and horizontal positions of the guidelines.
“`
Audi, VW , Skoda , Seat, Ford, MAN MIB-3
AHD / CVBS Camera Video interface
Art. 300 329
Compatible with 8.8″, 10.x”, 11.6″, 12.9″ , 13″ inch screens
4 Video Inputs for after-market device (Rear + Front + Left + Right camera inputs) AHD/CVBS compatible (PAL, NTSC, 720P NTSC, 720P PAL, 960P NTSC, 960P PAL,1080P NTSC,1080P PAL) Installation behind the radio/navi head unit. Parking guidelines + PDC for rear camera (CANbus dependent)
1
1. Connection:
Keep display connections original!
2
Dip Settings 8-DIPS [Black]: DIP1 ON = V1 (Left CAM) DIP2 ON = V2 (Right CAM) DIP3 ON = V3 Front CAM 10S after reverse (adjustable in menu) DIP4 ON = V4 Reverse CAM DIP5 OFF + DIP6 OFF DIP7 OFF + DIP8 OFF = OEM PDC position RIGHT DIP7 OFF + DIP8 ON = OEM PDC position CENTER DIP7 ON + DIP8 OFF = OEM PDC position LEFT
TOP 4-DIPS [Black]:
3
TOP 2-DIPS:
4-DIPS [Red] Setting: ALL OFF
Trigger wires:
– Trig-Rear*: insert +12/24V reverse signal to activate the rear camera (signal must be stable, not LED)
Usually the reverse function is detected by CANbus and it’s not needed to connect the Trig-REAR wire to reverse signal.
– Trig-Right: insert +12/24V to activate the video image of V2 – Trig-Front: insert +12/24V to activate the Front camera (optional).
Front camera also switches on automatically after reverse, and also by short-press switch button (included). – Trig-Left: insert +12/24V to activate the video image of V1
Additional power wires: – CAM POWER 12V: provides 12V to power the camera (if reverse function works by CANbus) – ACC OUT: provides 12V while ignition is on (when CANbus is running) – Manual ACC: connect to 12V ACC only when interface is disconnected from CANbus.
4
MENU settings: – Activate a camera/video channel and
press and hold the MENU button (3 sec.) to show the menu settings. – Use UP / DOWN to change a setting – Use MENU to jump to the next option
REAR CAM (V4) settings:
Brightness: adjust the brightness of the picture
Contrast: adjust the contrast of the picture
PosH:
move the picture to left/right
PosV:
move the picture to up/down
Trigger:
CAN: interface switches over if CAN data matches, otherwise trigger wire needs to
be connected.
Wire: use tigger wire to activate the camera/video channel
InputSource: AutoDetect: interface detects the inserted video signal automatically.
Other fixed video system settings are: PAL, NTSC, 720P PAL, 720P NTSC, 960P PAL,
960P NTSC, 1080P PAL, 1080P NTSC.
Guide-Type: turn guidelines on/off.
Guidelines options: Dynamic: guidelines turn with the steering wheel (if CAN Data matches).
Fixed: static guidelines (always on screen, independent of CAN data).
Guide-PosV: adjust the height position of the guidelines
GuideL-PosH: adjust the horizontal position of the left guideline
GuideR-PosH: adjust the horizontal position of the right guideline
Maxim-curve: adjust the maximum curve of the guidelines
External SW: activate the rear cam (V4) input by press+hold the external push button.
5
Dynamic guidelines: Choose between 6 types of dynamic patterns!
Fixed guidelines: Choose between 6 types of fixed patterns!
6
FRONT CAM (V3) settings:
Trigger: select the desired time to show the Front cam picture automatically after reversing. InputSource: AutoDetect: interface detects the inserted video signal automatically.
Other fixed video system settings are: PAL, NTSC, 720P PAL, 720P NTSC, 960P PAL, 960P NTSC, 1080P PAL, 1080P NTSC.
Left (V2) / Right (V1) settings:
Trigger:
CAN: interface switches over if CAN data matches, otherwise trigger wire needs to be connected. Wire: interfaces switches only over by using the tigger wire to activate the camera/video channel.
InputSource: AutoDetect: interface detects the inserted video signal automatically. Other fixed video system settings are: PAL, NTSC, 720P PAL, 720P NTSC, 960P PAL, 960P NTSC, 1080P PAL, 1080P NTSC.
7
Documents / Resources
 |
CARVISION MIB-3 CVBS Camera Video Interface [pdf] Instructions MIB-3 CVBS Camera Video interface, MIB-3, CVBS Camera Video interface, Camera Video interface, Video interface, interface |