CALIBER HWC 102PT User Manual
- Micro SD slot
For Micro SD card, to be able to record (max. 128GB) - Reset button
To reset to factory settings - Built-in microphone
- To listen while live view or using the intercom
- To record audio
- Built-in speaker
For talk back in 2-way intercom function - DC input
5V/1A Micro USB input
Optional mounting
Using the mounting plate the HWC102PT can also be mounted on a wall or ceiling (video image can be adjusted/flipped)
INSTALLATION INSTRUCTIONS
Warning: Make sure the camera to be within range of the Wi•Fi network to ensure a successful connection between the camera and router.
Wifi Configuration instructions
- Scan QR code to downlaod and install Caliber Smart Home
- Sign in with cell phone number or Email
- Make sure the device on which the app is installed, is corrected to the Wifi network on which you want the camera to be too.
Once the camera is plugged in it will be powered ON and the indication LED will flash rapidly or a sound/voicepromt will be heard. - Click + at the top right corner to select and add the device.
- The APP will ask if the indication LED is flashing or if the startup tone was heard. Then click “next step”. If this is not the case, please reset the camera holding the reset-button for approx 10 seconds.
- Check if the Wi-Fi network is correct, fill in the corresponding password and confirm. Note that the password can only contain letters and numbers, no special characters.
SPECIFICATIONS
| Image sensor | 1/4inch 1080p CMOS sensor | ||||
| Lens/viewing angle | :335° V:110° | ||||
| Night vision | IR LED’s 6pcs 0 5.0mm 5-10M | ||||
| Compression Format | H.264 Main Profile | ||||
| Max. Frame rate | 1-25fps | ||||
| Audio | Two way talkback function | ||||
| Network Protocol | HTTP, DHCP, DNS | ||||
| WIFI | Fi802.11b/g/n
req range: 2402-2480 Mhz x e.r.p: <100mW/20dBm |
||||
| Storage mode | local storage / client storage | ||||
| Interface | Micro SD/TF,
pport up to 128GB SD |
||||
| Pan-Tilt | 0-355° /-10-75° | ||||
| motion detection | port motion detection | ||||
| Power input | DC5V/1A | ||||
| Working environment | Working Temperature -20-50°C | ||||
| Installation |
|
||||
PRODUCT DESCRIPTION
The camera is a Wi-Fi based item. You can either control it with Android and IOS based APP by phone, anywhere, at any time.
FEATURES
- Works with Amazon Alexa by voice control
- Product works on Echo Show and Google Cast
- Remote view and control via APP anywhere anytime
- Scene control: works with other smart products
- CITA upgrade supported
- Motion detection recording
- Object tracking
We are continuously improving/updating our products and product Information. Its therefore possible that there is a slight difference between the description in this manual to the operation of the product. If something is different or not clear; always check our website for the most current version.
The (app) images and illustrations used are indicative and may vary per device and version.
Latest declaration form can be found at: DeclarationHWC102PT [PDF]
Documents / Resources
 |
CALIBER HWC 102PT [pdf] User Manual HWC 102PT |
