REMOTE CONTROLLER
APPENDIX
Remote Controller Appendix
Art. No. 6101001600
Remote control instructions
The remote control uses a CR2032-3V button battery. The remote control is on automatic standby mode when not in use. Normally the battery can be used for more then six months. The battery can be replaced by the same type.
Note: this item can be controlled with either the in-line controller, the remote controller or with the Calex app.
Memory function
The LED strip will remember the last setting before being swiched off and continue in that setting when switched back on.
Remote control function groups
Groups are marked by the grey areas.
- On / Off.
- Speed/Brightness/Sensitivity controls
- Scene modes
- Pause/Resume
- Auto mode
- Mode +
- Mode –
- Static Color
- Music mode +/-
- Warm white – Cold white
- Static Color
- Brightness adjustment (25% / 50% / 100%)
- Timer (0.5h / 1h / 1.5h / 2h)
In-line remote controller functions
A. Short press: turn on/off the light Long press (for 5 seconds): get into pairing mode (fast flash red light)
B. Music mode
C. Mode switch
Documents / Resources
 |
Calex 6101001600 Appendix Remote Controller [pdf] Instruction Manual 4104000900, 3203124.1, 6101001600, 6101001600 Appendix Remote Controller, 6101001600, Appendix Remote Controller, Remote Controller, Controller |