C PROX Quantek Hdoorevo Wiegand User Guide

Quantek Hdoorevo Wiegand

Product Specifications:

  • Product Name: HDOOREVO Wiegand
  • Compatibility: Works with Cloud Assistant
  • Feature: Wiegand Support

Product Usage Instructions:

Enabling Wiegand in Cloud Assistant:

  1. Access Cloud Assistant and navigate to Administration.
  2. Click on Families and scroll down to find Proximity.
  3. Tick the option for Wiegand to enable it.

Modifying Wiegand Settings:

  1. Go to Facilities in Cloud Assistant and select the desired
    facility (Facility name).
  2. Locate Equipments and choose the specific equipment (Equipment
    name).
  3. Access Parameters and then navigate to Wiegand
    Configuration.
  4. Adjust the Wiegand settings as needed.

Frequently Asked Questions (FAQ):

Q: Why do I need to enable Wiegand in Cloud Assistant?

A: Enabling Wiegand in Cloud Assistant allows
for seamless integration and configuration of Wiegand settings for
your HDOOREVO device.

Q: Can I modify the Wiegand settings for multiple
equipments?

A: Yes, you can modify the Wiegand settings for
each equipment individually by following the steps outlined in the
user manual.

HDOOREVO Wiegand
Wiegand must first be enabled in Cloud Assistant. Click Administration > Families > Scroll down to Proximity and tick Wiegand
EM ­ DCR-1 reads correct card number format. Mifare ­ Cloud assistant – set to 34 bits in Wiegand settings in equipment parameters. Set to 34 bits on wiegand keypad/reader. DMCR-1 reads correct card number format. PIN ­ Set to virtual card number on wiegand keypad. Code entered in cloud assistant = PIN#

Modify Wiegand settings
Facilities>(Facility name)>Equipments>(Equipment name)> Parameters>Wiegand Configuration

Documents / Resources

C PROX Quantek Hdoorevo Wiegand [pdf] User Guide
Quantek Hdoorevo Wiegand, Hdoorevo Wiegand, Wiegand

References

Leave a comment

Your email address will not be published. Required fields are marked *