C PROX Quantek Hdoorevo Wiegand

លក្ខណៈបច្ចេកទេសផលិតផល៖

• ឈ្មោះផលិតផល៖ HDOOREVO Wiegand
• ភាពឆបគ្នា៖ ធ្វើការជាមួយ Cloud Assistant
• លក្ខណៈពិសេស៖ ការគាំទ្រ Wiegand

ការណែនាំអំពីការប្រើប្រាស់ផលិតផល

ការបើក Wiegand នៅក្នុង Cloud Assistant៖

1. ចូលប្រើ Cloud Assistant ហើយចូលទៅកាន់រដ្ឋបាល។
2. ចុចលើគ្រួសារ ហើយរំកិលចុះក្រោមដើម្បីស្វែងរក Proximity។
3. ធីកជម្រើសសម្រាប់ Wiegand ដើម្បីបើកវា។

Modifying Wiegand Settings

Facilities>(Facility name)>Equipments>(Equipment name)> Parameters>Wiegand Configuration

1. Go to Facilities in Cloud Assistant and select the desired facility (Facility name).
2. Locate Equipment’s and choose the specific equipment (Equipment name).
3. Access Parameters and then navigate to Wiegand Configuration.
4. កែតម្រូវការកំណត់ Wiegand តាមតម្រូវការ។

Wiegand must first be enabled in Cloud Assistant. Click Administration > Families > Scroll down to Proximity and tick Wiegand

• EM – DCR-1 reads correct card number format.
• Mifare – Cloud assistant – set to 34 bits in Wiegand settings in equipment parameters. Set to 34 bits on wiegand keypad/reader. DMCR-1 reads correct card number format.
• PIN – Set to virtual card number on wiegand keypad. Code entered in cloud assistant = PIN#

សំណួរដែលសួរញឹកញាប់

Why do I need to enable Wiegand in Cloud Assistant?

Enabling Wiegand in Cloud Assistant allows for seamless integration and configuration of Wiegand settings for your HDOOREVO device.

Can I modify the Wiegand settings for multiple equipments?

Yes, you can modify the Wiegand settings for each equipment individually by following the steps outlined in the user manual.

ឯកសារ/ធនធាន

C PROX Quantek Hdoorevo Wiegand [pdf] ការណែនាំអ្នកប្រើប្រាស់ Quantek Hdoorevo Wiegand, Hdoorevo Wiegand, Wiegand

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់