BURNDY 54DB Insulation Piercing Connector Instruction Manual
BIPC4-010S Insulation Piercing Connector
Insulation Piercing Connector for Copper and Aluminum, Run:
#3-4/0, Tap: #10-#2, ideal for splicing, tapping and deadending aluminum and copper conductor with shearing installation technology. 6-point socket impact driver for easy installation and removal, no torque wrench required.
Features
- Flexibility! One connector allows for tap, splice or dead-end configurations
- Time Savings! Requires no cable stripping, conductor brushing, inhibitor application or after installation taping
- Engineered shear bolt technology applies consistent torque for efficient and reliable connectors
- Easy installation and removal – only requires 6-point socket impact driver
- cULus Listed Splicing Wire Connector, AL9CU Rated, for copper and aluminum conductor combinations up to 90 degrees C, *600 Volt applications
- Insulation piercing design for use in multiple applications overhead covered and bare taps, service and metering connections, and lighting system work
General
| Application – For Use On | Copper and Aluminum |
| Catalog Number | BIPC4/010S |
| UPC | 6.21946E+11 |
Logistics
| Carton Quantity | 12 |
| Pallet Quantity | 1080 |
Product Assets
Catalogs – Full Line BURNDY Catalog
Catalogs – Section A – Mechanical
Installation Manuals – Overhead Secondary Networks Insulation Piercing Connector BIPC
A proud member of the Hubbell Family.
©2024 Hubbell Incorporated. All rights reserved.
BRDY-BIPC4010S-SPEC-EN | REV 6/2024
Read More About This Manual & Download PDF:
Documents / Resources
 |
BURNDY 54DB Insulation Piercing Connector [pdf] Instruction Manual BURNDY, Product Name WIRE CONNECTOR, Model Numbers 54DB, 50124720, 54DB Insulation Piercing Connector, 54DB, Insulation Piercing Connector, Piercing Connector, Connector |