SP630E Instructions

SPI+5CH PWM All ln One LED Controller

Brief:

SP630E is compatible with multiple types of LEDs.It can work with 1/2/3/4/5CH W/CCT/RGB/RGBW/RGBCCT PWM and addressable LEDs, and it can also work with addressble+PWM combined LEDs:

NO.	Parameters			LED Type
	RGB	CW	WW
1				1CH PWM Single Color
2				2CH PWM CCT
3				3CH PWM RGB
4				4CH PWM RGBW
5				5CH PWM RGBCCT
6				SPI Single Color
7				SPI CCT
8				SPI RGB
9				SPI RGBW
10				SPI RGBCCT
11				SPI RGB+1CH PWM Single Color
12				SPI RGB+2CH PWM CCT

note: user can select the specific LED type on the App setting page

Features:

1. High performance, low power consumption 2.4G Bluetooth microprocessor;
2. Compatible with 12 kinds of type of LEDs;
3. Support App control, 2.4G touch remote control and 2.4G touch 86-type control panel;
4. The remote control and 86-type control panel can be set up for zone-control (can be divided into 4 zones), or unified control (ALL);
5. Support to set kinds of on/off animations and the default power-on state.
6. Support for modifying device name, color order correction and setting timers.
7. Support 3 kinds of music capture modes: cell phone microphone, player streaming, on-board microphone.
8. 5 major control pages in the App: dynamic, static, music, custom and setting; select different types of LED correspond to different App page content, as follows:

APP

https://download.ledhue.com/page/scenex/

1. SP630E supports App control for iOS and Android devices.
2. Apple devices require iOS 10.0 or higher, and Android devices require Android 4.4 or higher.
3. You can search “BanlanX”in App Store or Google Play to find the APP, or scan the QR code to download and install.

Operations

• Open the App, click the icon in the top right corner of the home page to add device .
• Please set the LED type and calibrate the color order according to the page prompts, you can also change these settings on the settings page.
• Click the icon in the upper right corner of the App to enter the settings page, where you can modify the name, modify the type of LED, calibrate the color order, set the timings, set the on/off effected.

2.4G Touch Remote Control:

SP630E can be used with 2.4G touch remote control and 2.4G touch 86-type panel; There are 4 kinds of remote control, 4 kinds of 86-type panel; different type of LED match different remote and panel models:

1 CH PWM Single Color	2 CH PWM CCT	3 CH PWM RGB	4 CH PWM RGBW	5 CH PWM RGBCCT	SPI Single Color
SPI CCT	SPI RGB	SPI RGBW	SPIRGBCCT	SPI RGB + 1CH PWM	SPI RGB +2 CH PWM CCT

Remote Models

86-Type Panel Models

Touch Functions

ON	OFF	Brightness Level	Warm/Nature/ Cold White	White	Color HUE/ Temperature Ring
Brightness	Brightness	Brightness Ring	Temperature Ring	Color HUE Ring	Color HUE/ Temperature Ring
Speed	Mode+	Mode-	Music effect	1-4 Zones	All Zones

Note:

1. Within 20s after power on, long press the ON key: binding/unbinding the remote/panel;
2. Within 20s after power on, long press Zone1~4/Zonal, to set the Zones;

Technical Parameters:

SP630E

Working Voltage: DC5V-24V	Working Current :3mA-13mA
PWM Single Channel Maximums Output Current: 6A	PWM Total Maximum Output Current : 12A
Working Temp: -20°C-60°C	Dimensions: 78mm*56mm*20mm

2.4G Remote/Panel

Working Voltage:3V(CR2032)	Quiescent Current: 35uA
RF frequency: 2.4GHz	Remote Range:30M
Remote Dimensions: 135mm*48mm*olm	Panel DIMensions:86mm*86mm*12mm

Wiring:

Different types of LED correspond to different output ports; The ports should match the selected LED type, and the specific port descriptions as follows:

LED Type		Output Port
		VCC	R	G	B	CW	WW	DAT	GND
1	1CH PWM Single Color
2	2CH PWM CCT
3	3CH PWM RGB
4	4CH PWM RGBW
5	5CH PWM RGBCCT
6	SPI Single Color
7	SPI CCT
8	SPI RGB
9	SPI RGBW
10	SPI RGBCCT
11	SPI RGB+1CH PWM Single Color
12	SPI RGB+2CH PWM CCT

Documents / Resources

BTF-Lighting SP630E PWM All In One LED Controller [pdf] User Manual SP630E PWM All In One LED Controller, SP630E, PWM All In One LED Controller, One LED Controller, LED Controller, Controller

References

• User Manual