BRUKER AS-2-Rb Spark Optical Emission Spectrometer User Manual
BRUKER AS-2-Rb Spark Optical Emission Spectrometer

Key Features

  • Adapter strand 2 for function alization of heliX ® Adapter Chip Spot 2.
  • Compatible with heliX ® Adapter Chip.
  • Includes Adapter strands for 50 regeneration.
  • Ideal for MIX&RUN sample preparation.
  • Adapter strand 2 carries a hydrophilic red dye (Rb) with a neutral net charge

heliX ® Adapter Chip Overview

2 spots with 2 different anchor sequences for DNA-encoded addressing.
Adapter Chip Overview

Product Description

Order Number: AS-2-Rb

Table 1. Contents and Storage Information

Material Cap Concentration Amount Buffer Storage
Adapter strand 2 – Rb White 400 nM 5 x 100 µL TE40 [1] -20°C

For research use only.

This product has a limited shelf life, please see expiry date on label.

To avoid many freeze thaw cycles please aliquot the nano lever.

Preparation | MIX&RUN

In-solution hybridisation of adapter and ligand strands:
Preparation

  1. Mix Adapter strand 1 – Rb (400 nM) and conjugated Ligand strand with ligand 1 (500 nM) at 1:1 ratio (v/v).
  2. Mix Adapter strand 2 – Rb (400 nM) and conjugated Ligand strand with ligand 2 (500 nM) at 1:1 ratio (v/v).
  3. Incubate separately the two solutions of step 1 and 2 at RT at 600 rpm for 30 min to ensure complete hybridization.
  4. Mix solution of step 1 and 2 at 1:1 ratio (v/v).

Solution is ready to use for biochip functionalization.

Stability of the solution is related to the stability of the ligand molecules.

Table 2. Additional material for function alization of spot 1 and reference spot 2

Material Concentration Buffer Related Product Name Order No
Adapter strand 1 – Rb 400 nM TE40 [1] Adapter strand 2 with red dye Rb AS-1-Rb
Ligand strand
carrying the conjugated ligand 1
500 nM PE40 [2] heliX® Amine Coupling Kit 1 HK-NHS-1
Ligand strand
carrying the conjugated ligand 2
500 nM PE40 [2] heliX® Amine Coupling Kit 1 HK-NHS-1

Example

Required volume for 3 function alizations: 100 µL with a final concentration of 100 nM

Vial 1 Vial 2
Adapter strand 1 – Rb(400 nM) Conjugated Ligand strand with ligand 1 (500 nM) Adapter strand 2 – Rb(400 nM) Conjugated Ligand strand + with ligand 2 (500 nM)
25 µL 25 µL 25 µL 25 µL

After incubation time, mix vial 1 and vial 2 to obtain 100 µL of ready-to-use DNA solution.

Contact

Dynamic Biosensors GmbH
Interchange Str. 8/10
81379 Munich
Germany

Bruker Scientific LLC
40 Manning Road, Manning Park
Billerica, MA 01821
USA

Order Information: order@dynamic-biosensors.com
Technical Support: support@dynamic-biosensors.com
www.dynamic-biosensors.com

Instruments and chips are engineered and manufactured in Germany.
©2025 Dynamic Biosensors GmbH
For Research Use Only. Not for use in clinical diagnostic procedures.

  1. TE40: 10 mM Tris, 40 mM NaCl, 0.05 % Tween 20, 50 μM EDTA, 50 μM EGTA
  2. If the protein is not stable in PE40 (TE40, HE 40), please check buffer compatibility with the switchSENSE® compatibility sheet.

AS-2-Rb v5.1
www.dynamic-biosensors.com
BRUKER Logo

Documents / Resources

BRUKER AS-2-Rb Spark Optical Emission Spectrometer [pdf] User Manual
AS-2-Rb v5.1, AS-2-Rb Spark Optical Emission Spectrometer, AS-2-Rb, Spark Optical Emission Spectrometer, Emission Spectrometer, Spectrometer

References

Leave a comment

Your email address will not be published. Required fields are marked *