BRONCO 2021
FRONT BUMPER FRAME TIE
IN BRACKETS
BFT2100 Front Bumper Frame Tie In Brackets
*VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST*
Start by removing the “U” shaped nut bracket located behind the frame face plate. This bracket was orginally used to mount your bumper and is replaced by the individual M12 nuts and washers provided.
Repeat this procedure on both sides of both frame rails. Be sure to clean the areas and paint any raw metal to prevent rusting. Position the Frame Tie in Brackets as shown, making sure they are flush up agaisnt the back of the frame face plate. Tighten both mounting bolts on each Frame Tie in Bracket and then procede with your bumper installation. 
| ITEM NO. | PART NUMBER | DESCRIPTION | QTY. |
| 1 | 2BFT2021-01 | INNER FRAME TIE IN BRACKET – PS | 1 |
| 2 | 2BFT2021-02 | OUTER FRAME TIE IN BRACKET – PS | 1 |
| 3 | 2BFT2021-03 | INNER FRAME TIE IN BRACKET – DS | 1 |
| 4 | 2BFT2021-04 | OUTER FRAMAE TIE IN BRACKET – DS | 1 |
| 5 | HB12175M40ZPCL88 | HEX BOLT M12-1.75 x 40mm ZINC PLATE CL8.8 | 8 |
| 6 | HN12175MZPCL8 | HEX NUT M12 X 1.75mm ZINC PLATE CL8 | 14 |
| 7 | FW5022ZP | FLAT WASHER Ø1/2″ X 1.375″ ZINC PLATE | 22 |
NOTES:
- BFT2100 = BARE STEEL OPTION
- BFT2101 = BLACK POWDER COAT
- WEIGHT = APPROX 6.25 LBS
| UNLESS OTHERWISE SPECIFIED: | NAME | DATE | |
| DIMENSIONS ARE IN INCHES TOLERANCES: ±0.010 ANGULAR: MACH ±1º TWO PLACE DECIMAL ±0.015 THREE PLACE DECIMAL ±0.005 |
DRAWN | MCH | 12/21/2021 |
| CHECKED | |||
| ENG APPR. | |||
| MFG APPR. | |||
| PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LOD LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LOD LLC IS PROHIBITED. |
MATERIAL: N/A |
||
| FINISH: SEE NOTES |
|||
| ECO: – |
|||
LOD LLC. 
DESCRIPTION:
2021 BRONCO FRONT FRAME TIE IN BRACKETS
DWG. NO.
BFT2100
BFT2101
REV A
SHEET 1 OF 1
SHEET SIZE: B
SCALE: 1:2.5
BFT2100 – Rev 1
12/27/21
Documents / Resources
 |
BRONCO BFT2100 Front Bumper Frame Tie In Brackets [pdf] Installation Guide BFT2100 Front Bumper Frame Tie In Brackets, BFT2100, Front Bumper Frame Tie In Brackets, Bumper Frame Tie In Brackets, Frame Tie In Brackets, Tie In Brackets, In Brackets |