Blauberg Turbo EC 200 Mixed Flow Inline Fans
Product Specifications
| Unit of measurement |
Turbo EC 200 |
|
| Connected air duct size | mm | 200 |
| Speed | – | 1 |
| Phases | – | 1 |
| Minimum supply voltage | V | 230 |
| Maximum supply voltage | V | 230 |
| Power supply frequency | Hz | 50/60 |
| Rated power | W | 123 |
| Unit current | A | 1.02 |
| Maximum airflow | m3/h | 1040 |
| Rotation speed at 50Hz | – | |
| Sound pressure level LpA at 3 m | dB(A) | 49 |
| Weight | kg | 3.95 |
| Transported air temperature (max) | °С | 55 |
| Transported air temperature (min) | °С | -25 |
| Ingress protection rating | – | IPX4 |
Mixed-flow inline fans with EC-motors
- Sound pressure level LpA at 3 m: 49
- Motor type: EC
- Impeller type: Mixed-flow
- Casing material: Plastik
- Installation in any position
Product Dimensions
| ØD | B | H | L | ØD1 |
| 198 | 239 | 277.5 | 295.5 | 209 |
Ecodesign
| Trademark | Blauberg | |||||
| Model | Turbo EC 200 | |||||
|
Specific energy consumption (SEC) (kWh/(m2/a)) |
Cold | Average | Warm | |||
| 54.1 | A+ | 27.1 | B | 11.6 | E | |
| Type of ventilation unit | Unidirectional | |||||
| Type of drive installed | Variable speed | |||||
| Type of heat recovery system | None | |||||
| Maximum flow rate (m3/h) | 910 | |||||
| Electric power input (W) | 123 | |||||
| Reference flow rate (m3/s) | 0.177 | |||||
| Reference pressure difference (Pa) | 50 | |||||
| Specific power input (SPI) (W/(m3/h)) | 0.094 | |||||
| Control typology | Local demand control | |||||
| Maximum external leakage rates (%) | 2.7 | |||||
| Declared typology | RVU UVU | |||||
| Sound power level (dB(A)) | 69 | |||||
|
The annual electricity consumption (AEC) (kWh/a) |
Cold | Average | Warm | |||
| 50 | 50 | 50 | ||||
|
The annual heating saved (AHS) (kWh/a) |
Cold | Average | Warm | |||
| 5536 | 2830 | 1280 | ||||
Installation
- Ensure the connected air duct size matches the unit size.
- Provide proper electrical connections within the specified voltage range.
- Securely mount the unit in a suitable location for optimal airflow.
Operation
- Turn on the power supply and select the desired speed setting.
- Monitor the airflow and adjust as needed for ventilation requirements.
Maintenance
- Regularly clean the unit and the air ducts to ensure efficient operation.
- Check for any unusual sounds or performance issues and consult the user manual for troubleshooting.
FAQs
What is the maximum airflow of the Turbo EC 200?
The maximum airflow of the Turbo EC 200 is 1040m3 h.
What is the weight of the Turbo EC 200?
The weight of the Turbo EC 200 is 3.95kg.
Documents / Resources
 |
Blauberg Turbo EC 200 Mixed Flow Inline Fans [pdf] User Guide 200, Turbo EC 200 Mixed Flow Inline Fans, Turbo EC 200, Mixed Flow Inline Fans, Inline Fans, Fans |