Turbo 150 T Mixed Flow Inline Fans
“
Specifications
- Connected air duct size: 150 mm
- Speed: 2
- Phases: 1
- Minimum supply voltage: 230 V
- Maximum supply voltage: 230 V
- Power supply frequency: 50/60 Hz
- Rated power: 42 W
- Unit current: 0.19 A
- Maximum airflow: 565 m3/h
- Rotation speed at 50hz: 50
- Sound pressure level LpA at 3 m: 32 dB
- Weight: 2.95 kg
- Transported air temperature (max): 60°C
- Ambient air temperature min: 0°C
- Ambient air temperature max: 44°C
- Ingress protection rating: IPX4
- Ingress protection rating of the drive: IPX4
Dimensions
- B: 220 mm
- H: 251 mm
- L: 289 mm
Ecodesign
- Trademark: Blauberg
- Model: Turbo 150 T
- Specific energy consumption (SEC): 53.8 kWh/(m2/a)
- Type of ventilation unit: Cold, Average, Warm
- Type of drive installed: A+
- Type of heat recovery system: 26.7 kWh/a
- Maximum flow rate: B
- Electric power input: 11.2 W
- Reference flow rate: E
- Reference pressure difference: Unidirectional
- Specific power input (SPI): Variable speed
- Control typology: None
- Maximum external leakage rates: 500 m3/h
- Declared typology: 50 Pa
- Sound power level (dB(A)): Local demand control – 66 dB(A)
Product Usage Instructions
- Ensure the connected air duct size matches the specified
dimensions (150 mm). - Check the phases and ensure it is set to 1.
- Verify the power supply voltage falls within the range of 230V
to ensure proper operation. - Adjust the speed settings as needed, with a maximum airflow of
565 m3/h. - Maintain ambient air temperatures between 0°C to 44°C for
optimal performance. - Monitor sound pressure levels to ensure they are within
acceptable limits (32 dB). - Follow proper installation guidelines for IPX4 protection
against ingress.
FAQ
Q: What is the maximum transported air temperature for the
Turbo 150 T?
A: The Turbo 150 T can handle transported air temperatures up to
60°C.
Q: What is the weight of the Turbo 150 T?
A: The Turbo 150 T weighs approximately 2.95 kg.
“`
blaubergventilation.com.au
Turbo 150 T
Mixed-flow inline fans · Sound pressure level LpA at 3 m: 44 · Motor type: AC · Control: Speed switch · Impeller type: Mixed-flow · Casing material: Plastik · Installation in any position · Cable with mains plug · Timer: Turn off timer
Connected air duct size Speed Phases Minimum supply voltage Maximum supply voltage Power supply frequency Rated power Unit current Maximum airflow Rotation speed at 50hz Sound pressure level LpA at 3 m Weight Transported air temperature (max) Ambient air temperature min Ambient air temperature max Ingress protection rating Ingress protection rating of the drive
Unit of measurement
mm V V Hz W A
m3/h –
dB(A) kg ° ° ° –
42 0.19 415
Turbo 150 T
150 2 1
230 230 50/60
50 0.22 565
32
44
2.95
60
0
0
IPX4
IPX4
blaubergventilation.com.au
Dimensions
ØD 148
ØD1 187
B
H
L
220
251
289
blaubergventilation.com.au
Ecodesign
Trademark Model
Specific energy consumption (SEC) (kWh/(m2/a))
Type of ventilation unit Type of drive installed Type of heat recovery system Maximum flow rate (m3/h) Electric power input (W) Reference flow rate (m3/s) Reference pressure difference (Pa) Specific power input (SPI) (W/(m3/h)) Control typology Maximum external leakage rates (%) Declared typology Sound power level (dB(A))
The annual electricity consumption (AEC) (kWh/a)
The annual heating saved (AHS) (kWh/a)
blaubergventilation.com.au
Blauberg
Turbo 150 T
Cold
Average
Warm
53.8
A+
26.7
B
11.2
E
Unidirectional
Variable speed
None
500
50
0.097
50
0.12
Local demand control
2.7
RVU UVU
66
Cold
Average
Warm
64
64
64
Cold
Average
Warm
5536
2830
1280
Documents / Resources
![]() |
BLAUBERG Turbo 150 T Mixed Flow Inline Fans [pdf] Owner's Manual Turbo 150 T Mixed Flow Inline Fans, Turbo 150 T, Mixed Flow Inline Fans, Inline Fans, Fans |