BITMAIN S19e XP Hyd Bitcoin Miner Antminer
Product Specifications
| Model | S19e XP Hyd. |
|---|---|
| Sub Version | Value |
| Crypto algorithm/coins | SHA256|BTC/BCH/BSV |
| Typical hashrate, TH/s | 251 |
| Power on wall @35, Watt | 5522 |
| Power efficiency on wall @35, J/T | 22 |
Detailed Characteristics
Power Supply
- Phase: 3
- Input voltage: 380~415 Volt
- Input frequency range: 50~60 Hz
- Input max current: 12 Amp
Hardware Configuration
- Network connection mode: RJ45 Ethernet 10/100M
- Server size (length*width*height, w/o package): 410*170*209 mm
- Server size (length*width*height, with package): 570*316*430 mm
- Net weight: 12.8 kg
- Gross weight: 14.1 kg
Environment Requirements
- Operating temperature: 20~50°C
- Coolant flow: 8.0~10.0 L/min
- Coolant pressure: Working Coolant (2-2)
- Coolant pH value: 3.5
- Diameter of Coolant pipe connector: OD10 mm
- Operation humidity(non-condensing): 10~90% RH
Product Usage Instructions
Power Supply Connection:
Connect the power supply to the specified input voltage and frequency range as mentioned in the specifications.
Hardware Setup:
Set up the server in the designated network connection mode using an RJ45 Ethernet connection. Ensure proper server size and weight considerations during installation.
Environment Setup:
Maintain the operating temperature between 20°C to 50°C. Monitor coolant flow, pressure, and pH value as per the specified ranges. Use the recommended types of coolant and ensure proper humidity levels.
Specification
| Product Glance | Value | |
| Model | S19e XP Hyd. | |
| Sub | 251T | 240T |
| Version | 10 | |
| Crypto algorithm/coins | SHA256|BTC/BCH/BSV | |
| Typical hashrate, TH/s(1-1) | 251 | 240 |
| Power on wall @35℃(1-2), Watt(1-1) | 5522 | 5280 |
| Power efficiency on wall@35℃(1-2), J/T(1-1) | 22 | |
| Detailed Characteristics | Value |
| Power supply | |
| Phase | 3 |
| Input voltage, Volt(2-1) | 380~415 |
| Input frequency range, Hz | 50~60 |
| Input max current, Amp | 12 |
| Hardware configuration | |
| Network connection mode | RJ45 Ethernet 10/100M |
| Server size (length*width*height, w/o package), mm | 410*170*209 |
| Server size (length*width*height, with package), mm | 570*316*430 |
| Net weight, kg | 12.8 |
| Gross weight, kg | 14.1 |
| Environment requirements | |
| Inlet coolant temperature, °C | 20~50 |
| Coolant flow, L/min | 8.0~10.0 |
| Coolant pressure, bar | ≤3.5 |
| Working Coolant (2-2) | Antifreeze/ Pure water/
Deionized water |
|
Coolant pH value |
Antifreeze: 7.0~9.0 Pure water: 6.5~7.5
Deionized water：8.5~9.5 |
| Diameter of Coolant pipe connector, mm | OD10 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
Notes:
- The hashrate value, power on wall, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power on wall and power efficiency on wall fluctuate by ±5%.
- Inlet coolant temperature.
- Caution: Wrong input voltage may cause server damaged.
- For detailed working coolant use and maintenance instructions, please refer to “ANTSPACE HK3 Water Cooling Container & Dry-Wet Tower Product Manual”, Chapter 9, Article 3, Point 6, “Maintenance of Coolant”!
Performance Curve
- Hashrate vs. Inlet Coolant Temperature
- Power Efficiency vs. Inlet Coolant Temperature
- The hashrate value, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by 3%, and the actual power efficiency on wall fluctuate by 5%.
Frequently Asked Questions (FAQ)
- What is the typical hashrate of the S19e XP Hyd. model?
The typical hashrate is 251 TH/s. - What is the input voltage range for the power supply?
The input voltage range is between 380 to 415 Volts.
Documents / Resources
 |
BITMAIN S19e XP Hyd Bitcoin Miner Antminer [pdf] Owner's Manual S19e XP Hyd, S19e XP Hyd Bitcoin Miner Antminer, Bitcoin Miner Antminer, Miner Antminer, Antminer |
