BITMAIN AntMiner S21e XP Hyd Bitcoin Miner
Specification
Product Glance Value
- Model S21e XP Hyd.
- Sub 430T
- Version 10
- Crypto algorithm/coins SHA256|BTC/BCH/BSV
- Typical hashrate, TH/s(1-1) 430
- Power on wall @35℃(1-2), Watt(1-1) 5590
- Power efficiency on wall@35℃(1-2), J/T(1-1) 13.0
Detailed Characteristics Value
- Power Supply
- Phase 3
- Input voltage, Volt(2-1) 380~415
- Input frequency range, Hz 50~60
- Input max current, Amp 12
- Hardware Configuration
- Network connection mode RJ45 Ethernet 10/100M
- Server size (length*width*height, w/o package), mm 339*173*207
- Server size (length*width*height, with package), mm 570*316*430
- Net weight, kg 13.8
- Gross weight, kg 15.7
- Environment Requirements
- Inlet coolant temperature, °C 20~50
- Coolant flow, L/min 8.0~10.0
- Coolant pressure, bar ≤3.5
- Working coolant(2-2) Antifreeze/ Pure water/Deionized water
- Coolant pH value
- Antifreeze: 7.0~9.0
- Prue water: 6.5~7.5
- Deionized water：8.5~9.5
- Diameter of coolant pipe connector, mm OD10
- Storage temperature, °C -20~70
- Operation humidity(non-condensing), RH 10~90%
Notes
- The hashrate value, power on wall, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power on wall and power efficiency on wall fluctuate by ±5%.
- Inlet coolant temperature.
- Caution: Wrong input voltage may cause server damaged.
- For detailed working coolant use and maintenance instructions, please refer to “ANTSPACE HK3 Water Cooling Container & Dry-Wet Tower Product Manual”, Chapter 9, Article 3, Point 6, “Maintenance of Coolant”!
Product Usage Instructions
Performance Curves
- Hashrate vs. Inlet Coolant Temperature
- Power Efficiency vs. Inlet Coolant Temperature
- The hashrate value, and power efficiency on wall are all typical values. The actual hashrate value fluctuates by ±3%, and the actual power efficiency on wall fluctuate by ±5%.
Setup Instructions
- Place the product on a stable surface with proper ventilation.
- Connect the power supply following the specified input voltage and current requirements.
- Ensure proper coolant flow and pressure within the recommended ranges.
- Connect the product to the network using the RJ45 Ethernet connection.
Maintenance Instructions
- Regularly check coolant levels and pH value to maintain optimal performance.
- Clean the coolant pipe connectors and ensure no blockages for smooth coolant flow.
- Monitor the hardware configuration for any abnormalities and take necessary actions.
FAQs (Frequently Asked Questions)
- Q: What is the optimal operating temperature for the product?
A: The product operates best within a temperature range of -20 to 70 degrees Celsius. - Q: How often should I check the coolant levels?
A: It is recommended to check the coolant levels regularly and top up if needed to maintain proper cooling efficiency.
Documents / Resources
 |
BITMAIN AntMiner S21e XP Hyd Bitcoin Miner [pdf] User Guide AntMiner S21e XP Hyd Bitcoin Miner, AntMiner S21e, XP Hyd Bitcoin Miner, Bitcoin Miner, Miner |
