| Light Status | Sound | Possible Cause | Remedies |
| Flashing Red | 1 Beep | Cliff Sensors are dirty |
Clean the Cliff Sensors with a dry cloth
 |
| Flashing Red | 2 Beep | Low power | Charge the battery |
| Flashing Red | 3 Beeps | Robot is on ledge or trapped | Turn Robot OFF > Move to new location |
| Front Caster Wheel Sensor is dirty |
Turn Robot OFF > Remove Front Caster Wheel Assembly > Clear debris from assembly and housing > Reinstall wheel
 |
||
| Flashing Red | 4 Beeps | Low suction | Turn Robot OFF > Empty the Dust Bin > Remove hair & debris from the suction inlet & filters |
| Solid Red | 1 Beep | Wheels are stuck | Turn Robot OFF > Remove hair & debris from wheels |
| Solid Red | 2 Beeps | Edge Cleaning Brushes are stuck | Turn Robot OFF > Remove hair & debris from edge cleaning brushes |
| Solid Red | 3 Beeps | Brush Roll is stuck | Turn Robot OFF > Remove hair & debris from brush roll |
| Solid Red | 4 Beeps | Bumper is stuck | Turn Robot OFF > Tap the Bumper several times to release any accumulated debris |
If remedy does not resolve the issue, please Contact Us
