Birdsnap 
User Manual
V1-VN-DB01 Bird Feeders with Camera
Warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
FCC (USA) 15.9 prohibition against eavesdropping except for the operations of law enforcement officers conducted under lawful authority, no person shall use, either directly or indirectly, a device operated pursuant to the provision of this part for the purpose of
overhearing or recording the private conversations of other unless such use is authorized by all of the parties engaging in the conversation. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2AY58-V1-VN-DB01
IC Caution: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
- Keep Birdsnap and all accessories out of reach of children and pets.
- Avoid placing the device behind furniture or near microwave products.
- Working environment: temperature: -10°C to 50°C (14°F to 122°F), relative humidity: 0-95%.
- The Birdsnap has an IP65 waterproof rating, which supports working properly in rains or snows.
- Please do not soak in water.
What’s In The Box
Birdsnap Structure
Assembling Birdsnap
Press the button to unlock the roof and fill in the seeds for birds. For a recommendation of common seeds that birds may like White Millet, Black Oil Sunflower Seed, Cracked Corn, Milo, Striped Sunflower Seed, Safflower Seed.
Charging the Battery
We recommend charging Birdsnap before use.
It takes about 14 hours to fully charge, and the status light will turn to solid green.
It can also be charged at the USB port next to the power button.
Turn On & Off Birdsnap
Turn on : Long press the power button for 3s.
Turn off : Long press the power button for 3s.
Wi-Fi mode : Double click the power button
Status Light
| LED Indicator | Description | |
 |
Solid Blue | Recording |
 |
None | Sleep/Power Off |
 |
Solid Yellow | Charging |
 |
Solid Green | Charging Finished |
App Download
Go to your App Store or Google Play on your smartphone, searc for ” VicoHome ” or just scan the QR code below to download the app:
- Strong lights may interfere with the device’s ability to scan QR code.
- Birdsnap only works with 2.4GHz Wi-Fi.
Installation your Birdsnap
Note:
Check the following things before you drill holes into your wall:
- Keep the device within range of your Wi-Fi signal.
- Please do not expose the Birdsnap lens to direct sunlight.
- Birdsnap has been successfully added to your Vicohome app and is able to stream video.
Step 1: Fix the Mounting Bracket on the object you choose.
*Make sure that the Mounting Bracket is installed in an area with sunlight (solar panels can be installed) within 3m.
Wall Installation
Use the provided drilling template to mark the position of holes on your wall.
Use drill bit (5/16″, 8mm) to drill two holes.
Stand Installation:
The installation steps are the same as for wall installation, but the Screw Bracket is installed at the bottom and fixed to the ground.
Tree Installation – Black Strap
Pole Installation – Hose clip
Step 2: Assemble Solar Charger
Find a good installation point and install the Solar Charger in a sunny location.
The specific installation steps are described in the Solar Charger Quick Start Guide in the Solar Charger box.
Step 3: Connect the Solar Charger to the Birdsnap
- Prepare the Solar Charger with charging cable, take the rubber stopper out.
- Thread the charging cable through the rubber plug.
- Insert the charging cable and firm the rubber stopper.
Step 4: Slide the Birdsnap into the Mounting Bracket.
*The installation is successful when you hear the “click” sound.
Tripod Installation
This installation is an additional option for users who need to connect to a tripod, which is not provided with this product.
Make sure you don’t have the Mounting Bracket installed on the bottom of the Birdsnap.
Step 1:
Slide the Birdsnap into the Tripod Adapter.
Step 2:
Install Birdsnap on the corresponding accessories, such as a photography stand.
Maintenance your Birdsnap
Step 1: Remove Birdsnap from the Mounting Bracket or Tripod Adapter.
Step 2: Open the Roof and remove it.
Step 3: Clean the Birdsnap
Find Us On:
Email address; birdsnap@outlook.com
Documents / Resources
 |
BIRDSNAP V1-VN-DB01 Bird Feeders with Camera [pdf] User Manual V1-VN-DB01 Bird Feeders with Camera, V1-VN-DB01, Bird Feeders with Camera, Feeders with Camera, Camera |