Biocare ECG1000 Connecting ECG Machine Instruction Manual

Operation on the computer side:

Lookup of the IP address of a computer:

1. Open the Command Prompt: Press the Windows key (Windows logo key) + R, then type 11 cmd” and press Enter. This will open a Command Prompt window.
2. Enter the command: In the Command Prompt window1 type “ipconfig11 and press Enter. Please record the IP address (IPv4) of the computer displayed here.
   

Operation on the ECG machine side:

Documents / Resources

Biocare ECG1000 Connecting ECG Machine [pdf] Instruction Manual ECG1000 Connecting ECG Machine, ECG1000, Connecting ECG Machine, ECG Machine, Machine

References

• User Manual