Document

TG D35

DYNAMIC MICROPHONE

PRODUCT INFORMATION

 

 

beyerdynamic logo

Thank you for selecting the TG D35 dynamic microphone from beyerdynamic.

Please take some time to read carefully through this information before using the product.

Safety Information
  • Protect the microphone from moisture and sudden impacts.
    You could damage the microphone!
  • Do not blow into the microphone and do not knock on the microphone basket. It is preferable to carry out a speech trial.
Application
  • Close miking of drums, for example snares and tom-toms
  • Miking up percussion instruments such as congas and bongos
Connection

The TG D35 is fitted with a male 3-pin XLR connector and a 3/8″ thread for mounting on stands or the supplied MKV 87 microphone clamp.
You can connect the microphone to any balanced microphone input. Available cables for the microphone can be found under “Optional Accessories”. The use of phantom power does not damage the microphone.

Setting up
  • The microphone clamp should be attached to the drum hoop or to similar hardware components; in this way, the microphone can be set at the optimum angle to the audio source.
  • The supercardioid polar pattern reduces crosstalk from neighbouring sources and increases feedback suppression.
Maintenance

Use a soft, damp cloth for cleaning the TG D35 microphone and connecting cable. If necessary, you can use a gentle cleansing agent (such as washing-up liquid), but on no account use a cleaner containing solvents! Make sure not to allow any liquid to enter the microphone grille.

Service

Servicing must be carried out by qualified service personnel only.
Dismantling the microphone yourself will invalidate the guarantee.

Version

Model       Description . . . . . . . . . Order #
TG D35    Dynamic drum microphone, supercardioid, black, with 3-pin male XLR connector, incl. MKV 87 microphone clamp . . . 708.429

Disposal

Disposal AThis symbol on the product, in the instructions or on the packaging means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.

Frequency response curve

beyerdynamic TG D35 Dynamic Drum Microphone A

Polar pattern

beyerdynamic TG D35 Dynamic Drum Microphone B

Technical Specifications

Transducer type . . . . . . . . . . . . . Dynamic
Operating principle. . . . . . . . . . . Pressure gradient
Polar pattern . . . . . . . . . . . . . . . Supercardioid
Frequency response:

Close miking . . . . . . . . . . . . . . . . . . . . . . . . . . 50 – 14,000 Hz
Distant miking (measured at 1 m). . . . . . . . . . 60 – 14,000 Hz

Open circuit voltage. . . . . . . . . . . . 2.2 mV/Pa (-53 dBV) ±3 dB
Nominal impedance . . . . . . . . . . 600 Ω
Load impedance . . . . . . . . . . . . > 2 kΩ
Connector . . . . . . . . . . . . . . . . . XLR, 3-pin, male
Dimensions:

Length. . . . . . . . . . . . . . . . . . 72 mm
Shaft diameter . . . . . . . . . . . . 28.5 mm
Head diameter . . . . . . . . . . . . 35 mm

Weight (without clamp). . . . . . . . 95 g

beyerdynamic Certiwww.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Subject to change without notice.

TG D35 / 649.015 (03.19)

Documents / Resources

beyerdynamic TG D35 Dynamic Drum Microphone [pdf] User Manual
TG D35 Dynamic Drum Microphone, TG D35, Dynamic Drum Microphone

References

Leave a comment

Your email address will not be published.