BenQ DV01K Camera Mount Assembly Instructions

BenQ-LOGO

BenQ DV01K Camera Mount

BenQ-DV01K-Camera-Mount-PRODUCT

Specifications

Item Quantity
Camera mount upper bracket 1
Camera mount lower bracket 1
USB-C (Female) to USB-A (Male) cable (1.8 m) 1
M3 screws (6 mm) 5
Cable saddles 2
Assembly instructions 1
  • M3 screw size used for mounting: 6 mm

Quick Guide

  1. Select the installation method based on your board model (Method 1: RE04, Method 2: RE04A/RE6505A/RE7505A, Method 3: RP05/RM05/RE05/RE8605A/RE05E/NE001A/RE04N).
  2. Secure the mount to the board frame using the specified number of M3 (6 mm) screws for the chosen method.
  3. Secure the DV01K camera to the mount using the specified number of M3 (6 mm) screws.
  4. Connect the DV01K to the board using the provided cable: connect the female USB-C end of the cable to the DV01K.
  5. Optional tip: for added security, use the M3 (6 mm) hex socket screws × 2 included with the DV01K camera.
BenQ-DV01K-Camera-Mount-FIG-1

Package contents

  • Camera mount upper bracket x 1 (For RP05/RM05/RE05/RE05A/RE05E/ NE001A/RE04A/RE04N models)
  • Camera mount lower bracket x 1 (For RE04 models)
  • USB-C (Female) to USB-A (Male) cable (1.8 m) x 1

BenQ-DV01K-Camera-Mount-FIG-2-1

  • M3 screws (6 mm) x 5
  • Cable saddles x 2
  • Assembly instructions x 1

BenQ-DV01K-Camera-Mount-FIG-3-2

Method l: RE04 installation

  1. Use M3 (6 mm) screws x 2 to secure the upper and lower bracket mounts.BenQ-DV01K-Camera-Mount-FIG-4
  2. Use M3 (6 mm) screw x 1 to secure the mount to the upper back side of the board’s frame. BenQ-DV01K-Camera-Mount-FIG-5
  3. Use M3 (6 mm) screws x 2 to secure the camera to the mount.
    Tip: Use the M3 (6 mm) hex socket screws x 2 included with the DV01 K camera for added security.
  4. Use the female USB-C end of the provided cable to connect the DV01 K to the board.

BenQ-DV01K-Camera-Mount-FIG-6

Method 2: RE04A/RE6505A/RE7505A installation

  1. Use M3 (6 mm) screw x 1 to secure the mount to the upper back side of the board’s frame. BenQ-DV01K-Camera-Mount-FIG-7
  2. Use M3 (6 mm) screws x 2 to secure the camera to the mount. Tip: Use the M3 (6 mm) hex socket screws x 2 included with the DV01 K camera for added security. BenQ-DV01K-Camera-Mount-FIG-6
  3. Use the female USB-C end of the provided cable to connect the DV01 K to the board.

BenQ-DV01K-Camera-Mount-FIG-9

Method 3: RP05/RM05/RE05/RE8605A/RE05E/NE001A/RE04N installation

  1. Use M3 (6 mm) screws x 2 to secure the mount to the upper back side of the board’s frameBenQ-DV01K-Camera-Mount-FIG-10
  2. Use M3 (6 mm) screws x 2 to secure the camera to the mount. Tip: Use the M3 (6 mm) hex socket screws x 2 included with the DV01 K camera for added security. BenQ-DV01K-Camera-Mount-FIG-11
  3. Use the female USB-C end of the provided cable to connect the DV01 K to the board.

BenQ-DV01K-Camera-Mount-FIG-12

 

Troubleshooting

  • Camera placement appears off-center (RE05E/NE001A and RE05A): the manual notes that for these model variants, the camera will be positioned off-center when installed via Method 3 or Method 2 as applicable.

Documents / Resources

PDF thumbnailDV01K Camera Mount
Assembly Instructions · BenQ, DV01K, camera mount, assembly instructions

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.