Other important information
Instructions
Important information
- Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
- Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
Specification
| Audio Inputs | |
| Type | 1/4″ TRS connector, electronically balanced |
| Impedance | 10 kΩ/ balanced or unbalanced |
| Gain range | -∞ to +15 dB |
| Operating level | +4 dBu/-10 dBV (switchable) |
| Maximum input level | +22 dBu |
| CMRR @ 1 kHz | Typically > 50 dB |
| Audio Outputs | |
| Main Out UR | |
| Type | 3=1/4″ TRS connector, impedance balanced |
| Gain range | -00 to +15 dB |
| Impedance | 240 0 balanced, 120 0 unbalanced |
| Maximum output level | -F22 dBu |
| Mon Out | |
| Type | 1/4″ TRS connector, impedance balanced, mono |
| Impedance | 240 Ω balanced, 120 0 unbalanced |
| Max. output level | +22 dBu |
| Phones Output | |
| Type | 1/4″ TRS connector, stereo |
| Minimum load impedance | 1000 |
| System Specifications | |
| Bandwidth | 20 Hz – 20 kHz ±0.2 dB |
| Frequency range | 10 Hz – 200 kHz, ±3 dB |
| Signal-to-noise ratio | < -97 dB |
| THD | 0.003% @ +4 dBu, 1 kHz, unity gain |
| Crosstalk | < -70 dB |
| Power Supply | |
| Switch-mode autorange power supply | 100-240 V -50/60 Hz |
| Power consumption | 15 W |
| Mains connection | Standard IEC connector |
| Physical | |
| Dimensions (H x W x D) | 44 x 483 x 149 mm (1.7 x 19.0 x 5.9″) |
| Weight | 1.8 kg (4.0 Ibs) |
Documents / Resources
 |
behringer RX1602 16-Input Rack Mount Analog Mixer [pdf] Instructions RX1602, 16-Input Rack Mount Analog Mixer, Rack Mount Analog Mixer, Analog Mixer, RX1602, Mixer |
