PB4429Z-P1A3 Baseus Smooth Writing
Please read this manual thoroughly before use, and keep it for future reference.
Overview
Button Instructions
- Press the power button to turn on/off.
Indicator
Working
Charging
User Instructions
Turn on and Use
- Press the power button to turn the stylus on and use it.
- Press the button again after power-on to turn the stylus off.
Note: The stylus will automatically enter the power-off state after 5min of no operations.
Charging
- Plug the iP connector of the stylus into the charging port of the iPad to charge.
- Use the included converter cable to connect the stylus to a USB-A-based power supply to charge.
Product Specifications
- Name: Baseus Smooth Writing 2 Series Plug-Type Stylus (iP Active Version)
- Model No.: BS-PS028
- Material: aluminum alloy barrel, POM plastic pen tip.
- Battery Capacity: 130mAh
- Accessories: USB-A to iP converter cable*1, active pen tip*1, user manual*1
Compatible Model
|
iPad Model |
Model No. |
Screen Size |
| Pad 6 | Al893/A1954 | 9.7 |
| Pad 7 | A2197/A2198/A2200 | 10.2 |
| Pad 8 | A2270/A2428/A2429/A2430 | 10.2 |
| Pad 9 | A2602/A2604/A2603/A2605 | 10.2 |
| Pad 10 | A2696/A2757 /A27777 | 10.9 |
| Pad mini 5 | A2133/A2124/A2126/A2125 | 7.9 |
| Pad mini 6 | A2567/A2568/A2569 | 8.3 |
| PadAir3 | A2152/A2123/A2153/A2154 | 10.5 |
| PadAir4 | A2316/A2324/A2325/A2072 | 10.9 |
| PadAirS | A2588/A2589/A2591 | 10.9 |
| Pad Pro | A1980/A2013/A1934/A1979 | 11 |
| Pad Pro 3 | A1876/A2014/A1895/A1983 | 12.9 |
| Pad Pro 2 | A2228/A2068/A2230/A2231 | 11 |
| Pad Pro4 | A2229/A2069/A2232/A2233 | 12.9 |
| Pad Pro3 | A2377/A2459/A2301/A2460 | 11 |
| Pad Pros | A2378/A2461/A2379/A2462 | 12.9 |
| Pad Pro4 | A2759/A2435/A2761/A2762 | 11 |
| Pad Pro 6 | A2436/A2764/A2437/A2766 | 12.9 |
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interterence received, including interterence that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product or batteries with regular household waste.
Customer Service
- 24-Month Warranty
- Litetime Tech Support
Contact Us
- care@baseus.com
- https://www.baseus.com
- +1 800 220 8056 (US)
- Manufacturer: Shenzhen Baseus Technology Co., Ltd.
- Add: 21a Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
- Hotline: 400-071-2711(China) / +1 800 220 8056 (Global)
- Website: https://www.baseus.cn(China)/https://www.baseus.com(Global)
- Official After-sales E-mail Address: service@baseus.com (China)/care@baseus.com (Global)
Made in China.
Documents / Resources
 |
Baseus PB4429Z-P1A3 Baseus Smooth Writing [pdf] User Manual PB4429Z-P1A3 Baseus Smooth Writing, PB4429Z-P1A3, Baseus Smooth Writing, Smooth Writing, Writing |
