baseus K01 Wireless Keyboard User Manual

User Manual

Wireless Keyboard

After-Sales

K01

Product Specification

Keyboard parameters:

NOTE

1. Compatible Systems: All Windows, Mac OS, Linux, Chrome OS.
2. The multimedia keys are for Win 8 and Win 10, for other systems, there may be no function for some combined keys.

You will receive

User Manual x1

Keyboard x1

How to set up

(1) Step 1: Please put the USB receiver into your computer.

(2) Step 2: Put batteries in the keyboard, then turn on the keyboard.

(3) Step 3: The keyboard will automatically connect to the computer, no driver needed.

Indicator Light

LED Indicator of the Keyboard

(1) Num Lock
The Num Lock indicator will turn green when Num Lock is activated.
(2) Caps Lock
The Caps Lock indicator will turn green when Caps Lock is activated.
(3) Low battery warning
The indicator light will flash slowly when the battery is almost empty.

Multimedia button description

FN Key + Function Key	Win Fn+Q	Mac Fn+W
	Reduce the Screen Brightness	Reduce the Screen Brightness
	Increase the Screen Brightness	Increase the Screen Brightness
	Windows Switching	Windows Switching
	Search Function	Search Function
	Voice Assistant	Siri
	Sleep
	Copy	Copy
	Paste	Paste
	Cut	Cut
	Email
	Music
	Language switch	Language switch

1. Previous Song
2. Play/Pause
3. Next Song
4. Calculator
   (Mac Only)
5. Print Screen
6. Volume+
7. Volume-
8. Mute

FAQ

Q1: The keyboard can not be connected.
A1:
Please switch on the keyboard, +  The indicator light remains on.
Plug the 2.4GHz USB receiver into the computer.
Within 10 seconds, put the keyboard at 10 cm from the receiver for pairing.
When the light turns off, the keyboard pairing is successful.
Q2: Where is my USB receiver?
A2: The keyboard and the mouse share a USB receiver, which is placed in the internal slot of the mouse.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.