Baseus C01198 User Manual

Thank you for choosing the Baseus Prime Trip VD1 Pro Dash Cam 4K+1080P Lithium Battery Version. It features 140° 3840 × 2160P UHD front recording and 120° 1920 × 1080P rear recording for comprehensive coverage.
This dash cam comes with an 18-month warranty. Please retain your purchase receipt for after-sales support. If you have any questions, please contact us.

Product Overview

2.1 Key Features

4K UHD Recording: Front cam supports 3840 x 2160P/2560 x 1440P/1920 × 1080P; rear cam supports 1920 × 1080P for crisp details.
Starves Starlight Night Vision: Equipped with the Sony IMX335 HD sensor, it delivers ultra-clear night vision with enhanced low-light performance.
Super Wide-Angle Lenses: 140° front + 120° rear coverage for multi-lane monitoring.
Wi-Fi Connection: 5G and 2.4G wireless connection for faster downloads and remote viewing and control via the Baseus app.
SSS Energy Saving: Supports solar-powered energy-saving mode to reduce battery consumption.
Battery Standby Monitoring: Features an exclusive low-power standby mode for 24/7 continuous monitoring.
G-Sensor: A triple-axis, six-phase acceleration sensor automatically locks critical footage upon impact to prevent overwriting.
Voice Control: Supports English commands for hands-free operation.
Loop Recording: Auto-overwrites old files to save storage.

2.2 Package Contents

Installation Guide

3.1 Pre-Installation

Ensure all the accessories in the package are present.
Prepare a high-speed microSD card (Class 10, 32GB-512GB recommended).

3.2 Installation Steps
1. Positioning:

Mount near the rearview mirror within wiper coverage for optimal view.
Adjust to the desired angle using the adjustable pivot.

2. Mounting:

Clean the windshield installation area to ensure it is free of dust and debris.
Apply the static cling film evenly to the cleaned surface.
Peel off the 3M adhesive backing and press the dash cam firmly onto the film.
Avoid moving or hitting the device after installation to ensure stability.

3. Power Connection:
Use the included 3.6-meter cable to connect the car charger to the 12V socket.
4. Cable Management:
Tuck wires along trim using the pry tool to avoid obstruction.5. Test:
Start the car to verify that the dash cam powers on and records.

Operation Guide

4.1 Power On/Off
On: Automatically switches on when connected to the power, or when the power button is pressed.
Off: Hold power button for 2 seconds, or disconnect power.
Screen Toggle: Press power button to turn screen on/off.
4.2 Button Layout & Functions
Button Layout

OK Button
Next/Audio Recording Button
Menu/Front-Rear Camera Switch Button
USB-C Power Input
USB-C Rear Cam Signal Transmission
microSD Card Slot
Reset Hole
Adjustable Pivot
Lens
Power Button (On/Off)
Wi-Fi Button

Button Functions
Power Button (10)
Upon powering on, it automatically turns on. Hold for 2 seconds to turn off. Press again to turn it back on.
When on, press to toggle screen on/off.
Next/Audio Recording Button (2)
Main screen: Tap to toggle the Audio recording function on or off.
Menu screen: Tap to cycle through available function options.
Menu/Front-Rear Camera Switch Button (3)
Main screen: Tap to access the settings menu.
Menu screen: Tap to return to the previous menu.
Dual-camera version: Double-tap to switch between front and rear cameras.
OK Button (1)
After selecting a function, press to confirm and save.
Wi-Fi Button (11)
Main screen : Tap to turn Wi-Fi hotspot on/off.
System Settings -> Wi-Fi hotspot screen: View Wi-Fi status or tap OK Button to toggle hotspot on/off.
4.3 Recording Mode
Default Mode: Automatically enters recording mode upon startup.
Loop recording: Supports segmented recording (default: 3-minute clips). Old files are automatically overwritten.
4.4 Photo Capture & Playback

Photo Capture: Use the voice command “Take Picture” to capture an image.
Playback: Press Menu/Front-Rear Camera Switch Button to enter the menu, then use the Next/Audio Recording Button to select a file, and press OK Button to play.

4.5 Menu Settings
Accessing the Menu: Press the Menu/Front-Rear Camera Switch Button to enter the settings interface.
4.5.1 Audio Settings

Audio Recording Function: Press the Next/Audio Recording Button to toggle on/off (default: off).
Volume: Adjustable to 4 levels: High, Medium, Low, Off; default: Medium.
Voice Control: Supports English commands (default: off).
Voice Commands:
“Take Picture”
“Open Screen”
“Turn off Display”
“Lock the Video”
“Open Recording”
“Turn off Recording”
“Show Front Camera”
“Show Rear Camera”

4.5.2 Video Recording Settings

Video Resolution: Front camera options: 3840 x 2160P, 2560 x 1440P, 1920 x 1080P. Default: 3840 x 2160P @ 25fps. Rear camera fixed at 1920 x 1080P @ 25fps.
Loop Recording: Options: 1/3/5 minutes, default: 3 minutes.
Rear Camera Function: Automatically activates when connected. Double-tap the Menu/Front-Rear Switch Button to switch preview.
Mirror & Flip: Enable/disable mirror or flip mode in settings, default: off.

4.5.3 System Settings

Screen Timeout: Options: 1/3/5 minutes or always on, default: 5 minutes.
Language: Default: English. Supports English, Chinese, Spanish, Portuguese, Polish, Russian, Ukrainian, German, Korean, and French.
Speed Unit: KM/H or MPH, default: KM/H.
Time Settings: Adjustable via menu.
Frequency: 50Hz/60Hz, default: 60Hz.
WiFi Hotspot: Switch on/off via the WiFi Button.

4.5.4 Parking Security
Voice Alert on Startup (if triggered): “The parking mode got activated while you were away.”
Note: High temperatures may cause the dashcam to stop parking security or shut down, resulting in data loss.

Collision Sensitivity: High/Medium/Low; default: Medium.

4.5.5 File Management
Loop Recording List: View front/rear video clips.
Emergency Videos: Access collision-detection recordings.
Captured Images: View/delete front/rear snapshots.

Feature Details

5.1 4K UHD Recording
Resolution: Front camera up to 3840x2160P; rear camera at 1920x1080P for crisp, high-definition footage.

https://bds-api-cn.baseus.com/app/official/download

5.2 Wi-Fi Connectivity & App Control
Supports 5G and 2.4G Wi-Fi, allowing real-time viewing and file export via the Baseus app.
Connection Steps:
a. Download the Baseus app (scan the QR code).
b. In the app, tap “Search/Add Device,” then select Dash Cam and choose the model VD1 Pro 4K.
c. Open your phone’s Wi-Fi settings, find the Wi-Fi network named VD1 Pro 4K-xxxx, and connect using the default password: 12345678.
d. Return to the app to complete the connection to the dash cam.
5.3 G-Sensor Collision Detection
Advanced triple-axis, six-phase acceleration sensor automatically locks collision footage into the emergency folder to prevent overwriting.

Storage & Data Management

6.1 Memory Card Requirements
Supports 32GB-256GB microSD cards (Class 10 or higher).
6.2 File Storage & Export
Format: H.264 encoding, MP4 format.
Export Options:
Connect to a PC via USB.
Remove the TF card and use a card reader.

FAQs

Q1: Dash cam won't turn on?

A: Check if the power cable is securely connected. Try using a different car charger or USB cable.

Q2: Unable to connect to Wi-Fi?

A: Make sure the Wi-Fi hotspot is enabled on the dashcam. Check if the Baseus app detects the correct model (VD1 Pro 4K).

Safety & Usage Guidelines

8.1 General Safety
Do Not Disassemble: Unauthorized disassembly, repair, or part replacement may void the warranty. Damage caused by improper handling is not covered.
No Operation While Driving: Avoid interacting with the dashcam while driving to prevent distractions.
8.2 Installation Precautions
Secure Mounting: Ensure the 3M adhesive is firmly attached to prevent the device from falling.
Do not reposition or apply force after installation.
Lens Maintenance: Keep the lens clean and unobstructed to ensure high-quality recordings.
Avoid Obstructions: Do not place unnecessary items around the dashcam to prevent unwanted reflections or interference.
8.3 Power Management
Use Only Original Accessories: Use the included car charger and cable (5V/2.4A). Using non-original power sources may cause fire or short circuits.
8.4 Environmental Adaptability
Heat Protection: In extreme heat, the dashcam may exit parking mode or shut down, potentially causing data loss. Avoid direct sunlight or prolonged exposure to high temperatures.
Operating Temperature: Designed for-20°C to 70°C. Use beyond this range may affect performance.
8.5 Lens Care
Regular Cleaning: Dust and smudges can reduce image clarity-clean the lens periodically. Ensure a Clear View: A blocked lens means no recording-check for obstructions before driving.
8.6 Memory Card Usage
Storage Selection: Choose a 32GB – 128GB microSD card based on recording needs and compatibility.
Regular Maintenance: The dashcam automatically overwrites old footage when storage is full. Backup important videos to a computer or external drive.
Safe Removal: Always turn off the dashcam before removing the microSD card to prevent corruption or data loss.
8.7 Emergency Handling
Preserve Evidence: If an accident occurs, do not delete footage, as it may serve as crucial evidence.
Firmware Updates: Regularly check for manufacturer firmware updates to improve performance and unlock new features.
Battery Maintenance: The dash cam contains a built-in battery, so please pay attention to proper use and care. Avoid overcharging or deep discharging the battery. When not using the device for an extended period, fully charge the battery before storage.

Technical Specifications

Baseus PrimeTrip VD1 Pro Dash Cam 4K+1080P Lithium Battery Version
Model No.: C01198
Power Input: DC 5V/1.5A (Max.)
Battery Capacity: 380mAh, 3.7V, 1.4Wh
Video Encoding: H.264
Lens Angle: Front: 140°; Rear: 120°
Resolution: Front Camera: 3840×2160P/2560×1440P/1920×1080P; Rear Camera: 1920×1080P
Display: 1.54-inch TFT, 240(RGB) × 240
G-Sensor: 3-axis, 6-phase
Wireless Connectivity: Wi-Fi IEEE 802.11b/g/n/ac/ax, 2.4GHz & 5GHz
Storage Support: MicroSD (Class 10 or higher), 32GB-512GB
Material: ABS + PC + Aluminum Alloy
Dimensions: 51 x 53.5 x 76.4 mm
Frequency bands and power are as below:

Model	Function	Bands	Operation Frequency	Max. Power
C01198	Wi-Fi	2.4GHz	2412-2472MHz	16dBm
		5GHz	5150-5250MHz	18dBm
			5250-5350MHz
			5470-5725M Hz
			5725-5850MHz

5150~5350 MHz can be used indoors only.

AT	BE	BG	HR	CY	CZ	DK
EE	Fl	FR	DE	EL	HU	IE
IT	LV	LT	LU	MT	NL	PL
PT	RO	SK	SI	ES	SE	UK

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product or batteries with regular household waste.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
RF Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The following importer is the responsible party.
Company Name: BASEUS TECHNOLOGY (US) INC
Address: 421 S BROOKHURST ST SUITE 1312
ANAHEIM, CA 92804
Telephone: 6145412699
Declaration of Conformity
Shenzhen Baseus Technology Co., Ltd. declares that the product is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.baseus.com/pages/euro-compliance

Gancio	Raccolta plastica
PP 5	Manuale
PAP 22	Raccolta carta

Warning Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other injuries.
Designed by Baseus
Made in China
PB6760Z-P0A1
1100047131
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang
Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Website: www.baseus.com

Collection points at www.quefairedemesdechets.fr
Choose to repair or donate your device!If you need help, please contact us.
(Global) +1 800 220 8056
(Global) care@baseus.com

Documents / Resources

Baseus C01198 [pdf] User Manual
C01198, Baseus, Baseus, Baseus, VD1, Pro, Solar, Dash, Cam, Front, and, Rear, 4K 1080P, Dash, Camera, for, Cars, Hardwire-Free, Parking, Mode, Starvis, Night, Vision, 32, GB, Card, Included, 5GHz, WiFi, GPS, 170 Wide, Angle, Voice, Control, B0FJ28QX2C

References

User Manual

Welcome