Backbone BB-N1 Game Controller

Thank you for buying this Backbone Labs product. Please keep this information for future reference.

Informational note for customers in the E.U. only
Where you see either symbol on any of our electrical products, batteries, or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in the EU, Turkey, or other countries with separate waste collection systems available. To ensure correct waste treatment, please dispose of them via an authorised collection facility, by any applicable laws or requirements. Waste electrical products and batteries may also be disposed of free of charge via retailers when buying a new product of the same type. Furthermore, within EU countries, larger retailers may accept small waste electronic products free of charge. Please ask your local retailer if this service is available for the products you wish to dispose of. In doing so, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste. This symbol may be used on batteries in combination with additional chemical symbols. The chemical symbol for lead (Pb) will appear if the battery contains more than 0.004% lead. The chemical symbol for cadmium (Cd) will appear if the battery contains more than 0.002% cadmium. This product contains batteries that are permanently built-in for safety, performance, or data integrity reasons. The batteries should not need to be replaced during the lifetime of the product and should only be removed by skilled service personnel. To ensure the correct waste treatment of the batteries, please dispose of this product as electrical waste.
Backbone Labs, Inc. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.backbone.com/compliance.

How to use

• Step 1: Snap the phone in

  

• Step 2: Scan the QR code to download the Backbone App

  

How to safely remove batteries

• Step 1
  Using a crosshead screwdriver, remove the screws (8 places)

  

• Step 2 
  Remove the rear housings
• Step 3
  Using a crosshead screwdriver, remove the screws (7 places)

  

• Step 4
  After disconnecting the connectors, remove the batteries.

  

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Product name: Game Controller, Backbone Pro
• Model number BB-N1
• Manufacturer name Backbone Labs, Inc.
• Address 1815 NW 169th Place, Suite 4020, Beaverton, OR 97006, USA.
• Contact backbone.com/support

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

Informational note for customers in Canada only

IC STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Informational note for customers in Singapore only

RF exposure information

This device has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The Body SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set the limit averaged over 10 grams of tissue. The Limb SAR limit is 4.0 watts per kilogram averaged over 10 grams of tissue. SAR tests are carried out with the device in standard operating positions, transmitting at its highest certified power level, in all its frequency bands. The highest SAR values are as follows:

• 1.6 W/kg (1 g) SAR limit
• Body (0 mm): O.lOW/kg (1 g)
• 2.0 W/kg (10 g) SAR limit
• Body (0 mm): 0.04 W/kg (10 g)
• 4.0W/kg (10 g) SAR limit
• limbs (0 mm): 0.04 W/kg (10 g)
  To maintain compliance with the RF Exposure requirements, please use with the thin specifications of this product.
  The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

SAFE USE GUIDELINES

Carefully review the Quick Start Guide for additional information on the intended use of the Backbone Pro controller.

• WARNING: Precautions for use 
  • Use caution or temporarily discontinue use in potentially hazardous situations.
  • For traffic safety, never use the product while walking, riding a bicycle, a motorbike, or while driving a car.
  • When storing the product, disconnect the plugs from the product.
  • When the product is dirty, wipe with a dry, soft cloth.
  • Take care not to get dust into the receptacle or jack.
  • If any itching or skin discomfort occurs during use, cease use immediately.
  • If any of the following symptoms appear, immediately cease use of the product, disconnect all devices, and consult your dealer: a) The device exhibits unnatural heating, smells, deformation, discoloration, etc, blA b foreign object enters the product.
• HANDLING
  Operating environment temperature and humidity: +5 °C to + 35 °C (+41 °F to +95 °F); less than 85% RH. Do not use this unit in locations exposed to high humidity or direct sunlight (or strong artificial light). Do not subject the product to strong forces or impacts, since damage could occur to the exterior appearance or product performance.
• CAUTION Never inspect the inside OR remodel this machine. If the customer remodels this machine, Backbone Labs, Inc. will no longer guarantee or warranty its performance.
• WARNING: USE BY CHILDREN This product is not a toy. This product is not edible. Place out of reach of small children to prevent accidental ingestion of small parts.
• WARNING: WATER RESISTANCE This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flowerpot) or expose it to dripping, splashing, rain or moisture. The product may be damaged if sweat or moisture is allowed inside. Take particular care when using the product in conditions of rain, lightning, near the ocean, river, or lake.
• WARNING: PHOTOSENSITIVE SEIZURES. A small percentage of people may experience sensitivity to light that can cause seizures or blackouts triggered by visual stimuli from light flashes and patterns. Stop using the product immediately if you suffer from seizures and consult a doctor.
• WARNING: REPETITIVE STRESS INJURY Repetitive movements using activities like gesturing or playing games on any controller can lead to occasional discomfort in your hands, wrists, arms, shoulders, neck, or other parts of your body. If you experience any discomfort, put the product down and take a break.
• WARNING: MEDICAL DEVICE INTERFERENCE This product uses radios or other components that emit electromagnetic fields and also contains magnets inside the product. Any headsets used with this product may also contain magnets. These electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Consult your doctor or the manufacturer of your medical device before using the Bluetooth• feature.
• WARNING: BLUETOOTH• INTERFERENCE The frequency used by the wireless Bluetooth feature of this product is the 2.4 GHz range. This range of radio waves is shared by various devices. This product has been designed to minimize the effect of other devices using the same range. However, in some cases, interference from other devices may reduce the connection speed, shorten the signal range, or cause the connection to be terminated unexpectedly.
• WARNING: LITHIUM-ION BATTERIES The device contains lithium-ion rechargeable batteries. Do not handle damaged or leaking lithium-ion batteries. If the built-in batteries’ fluid leaks, stop using the product immediately and contact customer service. If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention. If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water and consult your doctor. Do not allow the battery to come into contact with fire or subject it to extreme temperatures such as in direct sunlight, in a vehicle exposed to the sun, or near a heat source. Never attempt to open, crush, heat, or set fire to the batteries.

PRODUCT SPECIFICATIONS

• Product name: Game Controller, Backbone Pro
• Product number BB-Nl
• Mass Approx. 203 g
• Power source Built-in battery: 3.8 V ccc
• When charged using USB: 5 V – 15 V ccc 3 A
• BATTERY SPECIFICATIONS
  • Battery type: Built-in lithium-ion rechargeable battery x 2 pcs
  • Battery voltage 3.8 V ccc
  • Battery capacity 526 mAh X 2 pcs (or, 660 mAh X 2 pcs)
• BLUETOOTH SPECIFICATIONS
  • Bluetooth Version 5.0 (LE)
  • Frequency band 2402 MHz – 2480 MHz
  • Maximum output power: Less than 10 mW
• SUPPORTED HOST DEVICES
  • Supported iOS versions: iOS 16.4 or later
  • Supported Android versions: Android 10 or later
    Not:e Please update your phone software to the latest version for your product.
• Accessori:es Phone case adapters, Quick guide, Safety guide (this document)
  Connect:ors 3.5 mm headphone jack, USB-C plug, and receptacle
  Note – Specifications and design are subject to possible modifications without notice due to improvements.

ABOUT THE LICENSE AND TRADEMARKS

• Backbone is a trademark of Backbone Labs, Inc.
• iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
• The trademark “iPhone” is used in Japan with a license from Aiphone K.K.
• USB Type-C and USB-C are registered trademarks of the USB Implementers Forum.
• Android is a trademark of Google LLC.
• The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Backbone Labs, Inc. is under license. Othertrademarks and trade names are those of their respective owners.
• The company name, the product name, or the service name that has been described is a trademark or registered trademark of each company.
  Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
  WARNING: This product can expose you to chemicals including BPA, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

ABOUT COMPANY

• Backbone Labs, Inc. 1815 NW 169th Place, Suite 4020, Beaverton, OR 97006, Importer in the US and Canada: Backbone Labs, Inc.
• UKAR: Obelis UK Ltd. Sandford Gate, Oxford, OX4 6LB, UK
• EU RP: Obelis s.a. Boulevard General Wahis 53, 1030 Brussels, Belgium
• Tel: +(32) 2. 732.59.54
• Fax: +(32) 2.732.60.03
• E-mail: mail@obelis.net
  For customer support and answers to common questions, and troubleshooting, please visit backbone.com/support
  More information and additional translations at www.backbone.com/compliance

Documents / Resources

Backbone BB-N1 Game Controller [pdf] User Guide 2BOQT-BB-N1, 2BOQTBBN1, bb n1, BB-N1 Game Controller, BB-N1, Game Controller, Controller

References

• User Manual