B2 Audio DVPE 212 Enclosure Set With Two
Enclosure specifications
Dimensions: 840x380x(420-350) mm
Volume: 86.3 L / 3.05 cu.ft
Box Tuning: 35 Hz
Port Area: 196 cm / 6.2”
Port Type: L – Shaped L+ R
Subwoofer specification
Diameter: 2 x 12”
Max Power: 2000 Watts
RMS Power 1000 Watts
Impedance: 2 + 2 Ohm
Frequency Response: 25 Hz~200 Hz
Sensitivity (1w/1m): 91 dB
Voice Coil Diameter: 2.5” / 63.5 mm
Cone: Non Pressed Paper
Magnet: 80 Oz x 2
ENCLOSURE DIMENSIONS
WIRING OPTIONS
PARALLEL = 1 Ω [STEREO 2 +2 OHMJ
SERIAL=4Ω
WIRING IN PARALLEL REQUIRES ALL POSITIVE LEADS ARE RAN TOGETHER TO THE AMPLIFIERS POSITIVE SPEAKER TERMINAL.
THE SAME GOES FOR THE NEGATIVE LEADS, THESE WILL CONNECT TO THE NEGATIVE SPEAKER TERMINAL ON THE AMPLIFIER.
IF YOU HAVE A MULTICHANNEL AMPLIFIER, YOU CAN ALSO USE A STEREO CONNECTION AND HAVE A LOAD OF 2 OHM PER CHANNEL
CUSTOMER SUPPORT
WWW.B2AUDIO.COM – WWW.FACEBDOK.COM/B2AUDIO •
INSTAGRAM: @B2AUDIOGRAM
Documents / Resources
 | B2 Audio DVPE 212 Enclosure Set With Two [pdf] Installation Guide DVPE 212 Enclosure Set With Two, DVPE 212, Enclosure Set With Two, Set With Two, With Two, Two |