AXXESS AXDI-VET1 Corvette Amplifier Interface Installation Guide

ATTENTION: With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections, especially the air bag indicator lights, are plugged in before reconnecting the battery or cycling the ignition to test this product.

NOTE: Refer also to the instructions included with the aftermarket accessory before installing this device.

CONNECTIONS LD-AX-XSVI-GM5 DIAGRAM

INSTALLATION

With the key in the off position:

Connect the LD-AX-XSVI-GM5 harness to the interface and then to the wiring harness in the vehicle.

PROGRAMMING

Attention! If the interface loses power for any reason, the following steps will need to be performed again. Also, if installing an AXSWC, connect it after you initialize and test the interface/radio, with the key in the off position.

Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.

Note: If the radio does not come on within 60 seconds, turn the key to the off position, disconnect the interface, check all connections, reconnect the interface, and then try again.
Turn the key to the off position, and then to the accessory position. Test all functions of the installation for proper operation before reassembling the dash.

Note: If using the AXSWC, connect it after you initialize the AXDI-VET1, with the key in the off position.

Having difficulties? We’re here to help.

Contact our Tech Support line at: 386-257-1187
Or via email at: techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)

Monday – Friday: 9:00 AM – 7:00 PM Saturday: 10:00 AM – 5:00 PM Sunday: 10:00 AM – 4:00 PM

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow.

Metra recommends MECP-certified technicians

AxxessInterfaces.com
© COPYRIGHT 2023 METRA ELECTRONICS CORPORATION

REV. 8/8/23 INSTAXDI-VET1

Specifications

Product Name: Corvette Amplifier Interface
Applications: Chevrolet Corvette 1997-2004
Model Number: AXDI-VET1
Manufacturer: AxxessInterfaces.com

Product Usage Instructions

Installation

Before starting the installation process, ensure that the key is out of the ignition.
Disconnect the negative battery terminal to prevent any electrical mishaps during installation.
Refer to the provided Connections Diagram (LD-AX-XSVI-GM5) for accurate wiring connections.
Make all necessary connections, ensuring that all components are properly plugged in.
Reconnect the battery after all connections are made and test the product by cycling the ignition.

Programming
For programming instructions, refer to the detailed information available on AxxessInterfaces.com.

Contact Information
If you encounter any difficulties during installation or usage, contact Tech Support:

Phone: 386-257-1187
Email: techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time):
- Monday – Friday: 9:00 AM – 7:00 PM
- Saturday: 10:00 AM – 5:00 PM
- Sunday: 10:00 AM – 4:00 PM

Additional Information:
For further enhancement of your skills, consider enrolling in the Installer Institute for mobile electronics training. Metra recommends MECP-certified technicians for installation and maintenance.

FAQ

Q: What should I do before installing the Corvette Amplifier Interface?
A: Before installing the product, make sure to disconnect the negative battery terminal and refer to the aftermarket accessory’s instructions for guidance.

Documents / Resources

AXXESS AXDI-VET1 Corvette Amplifier Interface [pdf] Installation Guide
AXDIVET1, AXVI-VET1, 1997-2004, AXDI-VET1 Corvette Amplifier Interface, AXDI-VET1, Corvette Amplifier Interface, Amplifier Interface, Interface

References

User Manual

AXXESS AXDI-VET1 Corvette Amplifier Interface