Axess Epbt103-Bl TWS Wireless Headphone
Specifications
- Product Dimensions
1 x 1.5 x 0.25 inches - Item Weight
1.6 ounces - Batteries
1 Lithium Ion batteries - Form Factor
In-Ear - Cable Feature
Without Cable - Bluetooth Specifications
Bluetooth 4.2 - Operating Distance
5-10M - Working Time
Up to 2-4 hours - Charging Input Voltage
DC 5V - Speaker Power
2’5mW - Built-in Battery
50mAH - Brand
Axess
Introduction
The wireless Bluetooth earphones are another example of how Axess combines fashion, inventiveness, and usability. You’ll be able to instantly connect to any Bluetooth device and listen to your music wherever you go with no hassle. Furthermore, as these earphones are actually wire-free, there is no need to deal with the typical tangled mess that comes with other “wireless” models. Because the EPBT103 earphones contain a built-in rechargeable 50mAh battery, you may enjoy uninterrupted audio entertainment for up to 4 hours.
GETTING STARTED
- Remove the product from the box.
- Remove any packaging from the product.
- Please retain all packaging after you have checked and counted all the items on the contents list below.
PACKAGE CONTENTS
- Wireless Stereo Sport Earbuds
- USB Charging Cable
- Instruction Manual
SAFETY INSTRUCTIONS
- Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
- Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the unit.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Do not use the unit with wet hands.
- Do not put objects into any of the openings.
- Keep the unit free from dust, lint, etc.
- Do not use this unit for anything other than its intended use.
- Keep the unit out of reach of children; this product is not a toy.
- Do not use the handset at excessive volume levels, as damage to the hearing may occur
DESCRIPTION OF PARTS
- Speaker
- LED Light Indicator
- Charging Port (side)
- MF (Multi-Function/Phone Button)
INSTRUCTIONS FOR USE
- Once fully charged, make sure your Bluetooth function is turned on in your main device (i.e., computer, laptop, tablet, or smartphone). Press and hold the multifunction button (MFB-the flat Line of both of the earbuds) on only one of the earbuds until the small LED light flashes red and blue signaling that the earbud is ready to pair.
- After the first earbud is in pairing mode, press and hold the MFB on the second earbud for a brief few seconds until the red light come on (do not place second bud into pairing mode, only one of the earbuds needs to be placed into pairing mode). The second earbud will connect automati¬cally with the first earbud.
- Then go into your device’s Bluetooth setting and tap on “Axess EPBT103” (should only have one option in your mobile device).
- To pause the audio/video file, simply press once on either earbud’s MFB. To resume playing the audio/video file, simply press the MFB again. If playing an audio file (will work only for audio files, not video), you can skip to next song by double pressing the MFB button.
- Recharging Earbuds: insert the first earbud into protruding charging nozzle. Insert the other earbud in the same fashion into other charging nozzle. Both earbuds should be snuggly plugged in. Charging process will be complete when the red light on charging buds turns blue.
Answering calls
- To answer the call, simply press on the MFB button once in the earbud that is paired with your mobile device. The built-in mic will transmit your voice to the caller. To end the call, press the MFB button of that same earbud once.
- To reject the call, press the MFB on the earbud that is paired with your device twice.
LISTENING TO MUSIC
Once the Earbuds are paired with your device you can stream music wirelessly through the wireless earbuds. Should you encounter any problems while streaming please refer your device’s user manual for further information.
Making a Call
Basic Operation
Please Note
Not all mobile phones support all functions listed above. Please refer to you cell phone’s user’s manual for further information. Certain functions and indication tones may vary depending on your mobile phone When the volume is adjusted to max you Will hear an indication tone with message “Volume maximum.
LED Indicator
Charging Indication
LED Indicator
CARE AND MAINTENANCE
Read the following recommendations before using the Wireless Earbuds. Following these, you will be able to enjoy the product for many years.
- Do not expose the Wireless Earbuds to liquid, moisture, or humidity to avoid the product’s internal circuit being affected.
- Don’t use abrasive cleaning solvents to clean the device.
- Do not expose the device to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
- Don’t dispose of the device in a fire as it will result in an explosion.
- Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
- Don’t let the device fall on the floor. The internal circuit might get damaged.
- Don’t attempt to disassemble the device as it may get damaged if you are not a professional.
Frequently Asked Questions
No, it does not but does come with a charging cable.
It should pair both. Once one is active and on, the other should automatically pair.
In your phone’s Bluetooth settings, turn on your headphones and look for new devices. Pair with the appropriate earbuds (they should have “TaoTronics SoundLiberty 53” on them, for example). You’re online and prepared to enjoy some music! The next time you turn on your earbuds, your phone will automatically link with them.
Take out the earphones from the case, then turn them off by pressing the buttons for a short period of time. Hold down the buttons on both earbuds for around 5 seconds starting with the earbuds in the OFF position. Approximately 5 seconds after turning white, the LEDs will switch off. Your earbuds will reset as a result.
The standard process for resetting earbuds like these is to 1) put the earbuds in the charging case while leaving the lid open, and 2) press and hold the charging case’s button for 10+ seconds. At that point, the charging case’s indicator light should change to show that the reset was successful.
Your wireless earphones might only work on one side since the initial setup of the earbuds may not have gone smoothly. Other causes include a glitch (which necessitates a manual reset), the necessity to Bluetooth reconnect to your other device, and genuine hardware damage.
The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.
Open the Settings app on your phone. View your remaining charge and estimated battery life under “Battery.” To learn more, select Battery.
