AWOW P13 Android Tablet User Manual

Android Tablet
User manualSetup, safety and hardware information
Quick Start & Safety Guide

Warranty Activation

Why activate?
By activating your warranty, you will receive:

• Extended warranty: 1 + 2 years of coverage
• Priority service: Faster response to service requests
• Product updates: Early access to new features and improvements

Why is it necessary?
Without activation, you will not be eligible for the extended warranty or the exclusive after-sales benefits listed above.
How to activate:

1. Scan the QR code below with your smartphone.
2. Follow the on-screen instructions.
3. Complete all steps until the confirmation message appears.
   Note: Only after successful activation will your extended warranty be valid.

https://www.verifymessage2023.top/?scan=1&size=800

Keyboard Pairing Guide

• Make sure the keyboard has power. Press the ‘Connect’ button to enter pairing mode. The indicator light will blink to show it’s ready.
• Go to the “Settings” menu on your Android tablet and turn on Bluetooth by selecting “Bluetooth.”
• In Bluetooth settings, tap on “Pair new device” or “Available devices.” Look for and select “BT Keyboard”.
• Click “Confirm” or “Pair” and wait for the connection to finish.

That’s it! Your Bluetooth keyboard should now be successfully connected to your Android tablet.

https://drive.google.com/file/d/10jnfLTDDReb36gXT34acjt2CwBixQmlz/view?usp=sharing

Battery & Charging Safety Instructions

• Use only the original charger and cable provided with the device.
• Do not use damaged chargers, cables, or power adapters.
• Charge the tablet in a dry, ventilated place. Avoid charging in direct sunlight, on soft surfaces (like beds or sofas), or near heat sources.
• Do not use the device while it is charging if the temperature of the device becomes too high.
• Disconnect the charger once the battery is fully charged.
• Do not attempt to disassemble, pierce, crush, or expose the battery to fire or water.
• If the battery shows swelling, leakage, or unusual heat, stop using the device immediately and contact customer support.
• The device is designed to operate safely within -10°C to +55°C. Do not charge the battery outside of this temperature range.
• Long-term storage: if not used for an extended period, charge the battery to around 50% every 3 months to maintain performance.

Usage Warnings

•  This tablet does not support SIM cards. Do not attempt to insert SIM cards into the device. Inserting SIM cards into unsupported slots may damage the device and void the warranty.
• Do not expose the tablet to fire, heat sources, or direct sunlight for extended periods.
• Keep the device away from liquids and moisture to avoid electric shock or damage.
• Do not attempt to disassemble, modify, or repair the tablet yourself. Unauthorized repairs will void the warranty.
• Avoid dropping or subjecting the tablet to strong impact, which may cause internal damage.
• Do not insert incompatible accessories, cables, or TF cards into the device.
• Keep small parts out of reach of children to avoid choking hazards.
• Prolonged use of headphones at high volume may cause hearing damage—use responsibly.
• Stop using the device immediately if it emits unusual heat, smell, smoke, or noise, and contact customer support.
• Only use certified chargers and accessories that comply with local safety standards.
• This product is not a toy. Children should use the device under adult supervision.

First-time Setup Guide

Power On
Hold the Power button for 2–3 seconds until the screen lights up.
Language Selection
Choose your preferred language on the welcome screen.
Wi-Fi Connection
Select a Wi-Fi network and enter the password to connect.
Google Account Setup
Sign in with your Google account to access Play Store and cloud services.
You can skip this step and sign in later if preferred.
Date & Time
Confirm or adjust your time zone, date, and time.
Basic Settings
Set screen lock (PIN, password, or pattern) for security. Adjust brightness and volume if needed.
Complete Setup
Follow on-screen prompts until the home screen appears. The tablet is now ready for use.

Basic Operations

Power On / Off
Power On: Hold the power button for 2–3 seconds. Select your language and follow the setup wizard.
Power Off / Restart: Hold the power button for 2 seconds to display options, then select Power Off or Restart.
Force Shutdown
Hold the power button for 10 seconds. Reset Use a pin to press the Reset button to force restart the tablet.
Sleep Mode
Press the Power button once to enter Sleep Mode; press again to wake. Adjust auto-sleep： Settings > Display > Screen timeout.
Factory Reset
Ensure battery is above 30%. Go to Settings > System > Reset Options > Factory Reset. The tablet will reboot to factory state.
Virtual Memory Settings Path: Settings > System > Memory Expansion > RAM Expansion Size Settings. Select size and restart to apply.
Gestures & Navigation Path: Settings > System > Gestures > System Navigation. Switch between Gesture Navigation and Three-Button Navigation.

Device Layout and Functionality

Hardware Information

For warranty repair service, please contact our Customer Care Center at support@awowtech.com
https://awowtech.com
Our support team will verify your warranty eligibility based on the original purchase date and provide repair instructions. If the Tablet PC is not normally sold in the country of use, it must be returned to a supported country for service. We strongly recommend that you activate your extended warranty to enjoy better after-sales service, including free shipping, repair service, and replacement material costs. Thank you for choosing and using our product.

Manufacturer: Aiwotai Technology (shenzhen) Co., Ltd.
Address: A602-603, Jinfulai Building, Dabao Road, Xin’an Street, Baoan
District, Guangdong Shenzhen
Made in China