AVS RC10 Smart LCD Remote Controller User Guide

AVS RC10 Smart LCD Remote Controller

AVS RC10 Smart LCD Remote Controller

Specifications:

  • Item: AVS RC10 Smart LCD Remote
    Controller
  • LCD Size: 1.14″ (IPS Panel)
  • Viewing Angle: Horizontal/Vertical
  • Brightness: Typical
  • Orientation: Landscape
  • Coverlens: PMMA
  • Button Backlight: 4 (Single-Color)
  • Sensors: Light, Wind (Option), Baro (Option),
    Gyro (Option)
  • VTorque: Option: Requires Wind, Baro, and Gyro
    Sensor
  • Bluetooth: BLE 5.x (Option)
  • Memory: Up To 32MB
  • Interface: CAN/CANopen, UART, RS-485, RS-232,
    LIN
  • Power (Wide VIN Range): 7 – 55V
  • No. of Buttons (Total): 4x (Power, Light/Menu,
    Assist Up, Assist Down)
  • NFC: Yes (Option)
  • Display Data: Ride Time, ODO, Rem. Range, Bat.
    SoC, Bat. Temperature, Avg. Speed, Max. Speed, Cadence, Light
    Status, Assist Level, BLE Status, Walk Assist (Options:
    Time-To-Dest., Dist. Travelled, Altitude, Accum. Altitude,
    Windspeed, Humidity, Temperature, Rider Power)

Product Usage Instructions:

A. Overview

The AVS RC10 Smart LCD Remote Controller is a versatile device
with various features and sensors for enhanced functionality.

B. Button Operation (AVS Default)

The four buttons on the remote controller serve different
functions: Power button for turning the device on/off, Light/Menu
button for controlling light settings or accessing the menu, and
Assist Up/Down buttons for adjusting assist levels.

C. Light Sensor Operation (AVS Default)

The light sensor on the device automatically adjusts the display
brightness based on ambient light conditions.

D. Product Dimensions

The product dimensions are not provided in this extract. Please
refer to the complete user manual for detailed product
dimensions.

FAQ:

Q: How do I pair the remote controller with my device?

A: To pair the remote controller via Bluetooth, go to the
Bluetooth settings on your device and search for the AVS RC10 Smart
LCD Remote Controller. Select it to establish the connection.

Q: Can I use the remote controller with multiple devices?

A: The remote controller can be paired with multiple devices but
can only be actively connected to one device at a time.


“`

AVS Electronics (HK) LTD

NOVEMBER 2024

AVS RC10 Smart LCD Remote Controller

Quick Start Guide (QSG)
©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

AVS Electronics (HK) LTD

NOVEMBER 2024

Revision History

Date

Description

Approval

11/01/2024 08/15/2024 08/15/2024
08/14/2024 07/13/2022 07/12/2022

Version 5.0 QSG Update (Updated Safety Label Artwork) Version 4.51 QSG Update (Updated AVS logo and Product Images) Version 4.1 QSG Update (Updated AVE logo) Version 4.0 QSG Update (FCC & UKCA Update) Version 3.1_Preliminary Draft Release
Version 3_Preliminary Draft Release

B. D. Weidemann B. D. Weidemann B. D. Weidemann B. D. Weidemann B. D. Weidemann B. D. Weidemann

07/07/2022 Version 2_Preliminary Draft Release

B. D. Weidemann

07/07/2022 Version 1_Preliminary Draft Release

Andreas Hoffmann Luis Tseng Jerry Wang

B. D. Weidemann

Function Project Manager
Project Manager
Project Manager
Project Manager
Project Manager Project Manager Project Manager Supervisor Product Manager Supervisor Project Manager

©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

AVS Electronics (HK) LTD

NOVEMBER 2024

Table of Contents

Page

A.

Overview………………………………………………………………………………………………………………………………………4-5

B.

Button Operation (AVS Default)…………………………………………………………………………………………………….6-7

C.

Light Sensor Operation (AVS Default) ……………………………………………………………………………………………..7

D. Product Dimensions…………………………………………………………………………………………………………………………7

E.

Location of Markings………………………………………………………………………………………………………………………..8

F.

Disposal and Recycling……………………………………………………………………………………………………………………..8

G. Warnings………………………………………………………………………………………………………………………………………8-9

H. Manufacturer Details……………………………………………………………………………………………………………………….9

©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

AVS Electronics (HK) LTD

NOVEMBER 2024

A. Overview
· This Quick Start Guide (QSG) is intended for users of the RC10 Smart LCD Remote Controller. The QSG provides a step-based approach that is easy to follow and focused on helping the user quickly get familiar with the RC10’s features and functions. Carefully read the QSG before operating the E-Bike
A.1 Product Image

A.2 Main Features & Specifications

Main Features

· 1.14″ Landscape IPS LCD

· High brightness with wide viewing angles

· Backlight illuminated buttons

· Sensors and BT wireless connectivity (Option)

· Standalone or in combination with CD9, CD8, TT10 or TT09

Specifications

Item

Definition

LCD Size

1.14″ (IPS Panel)

Viewing Angle (Horizontal/Vertical) Brightness (Typical)

160° (80°/80°)/160° (80°/80°) 1,300cd/m2

Orientation

Landscape

Coverlens

PMMA

Button Backlight

4 (Single-Color)

Sensors

Light, Wind (Option), Baro (Option), Gyro (Option)

VTorque

Option: Requires Wind, Baro and Gyro Sensor

Bluetooth

BLE 5.x (Option)

Memory

Up To 32MB

Interface

CAN/CANopen, UART, RS-485, RS-232, LIN

Power (Wide VIN Range)

7 – 55V

No. of Buttons (Total)

4x (Power, Light/Menu, Assist Up, Assist Down)

NFC

Yes (Option)

Ride Time, ODO, Rem. Range, Bat. SoC, Bat. Temperature, Avg.

Display Data

Speed, Max. Speed, Cadence, Light Status, Assist Level, BLE Status, Walk Assist (Options: Time-To-Dest., Dist. Travelled, Altitude,

Accum. Altitude, Windspeed, Humidity, Temperature, Rider Power,

Calories, FTP, CdA, Crr, ABS Status, Slope)

Mounting

Hinge, 2x M4 Screw

IP Level

IP56

Storage/Operating Temperature

-20° to +60°C (-4° to +140°F)/-10° to +50°C (14° to +122°F)

Connector

AVS 6-Pin

Dimensions (W x D x H) Weight

78mm x 45mm x 60mm (3.1″ x 1.8″ x 2.4″) 50g (1.8oz)

Color

Housing: Pantone Black, Buttons: Cool Silver

©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

AVS Electronics (HK) LTD
A.3 Button Behavior & Description

NOVEMBER 2024

Item No. 1 2 3 4
5
6
7

Description
Power On/Off Button Pitot Tube for Windsensor
Ambient IR Lightsensor IPS LCD Display Light Mode · On/Off (Option: Front/Rear, Front & Rear, Day Light, High Beam Light, Parking Light) · Confirm – In Settings Mode (With CD9/CD8/TT10/TT09 only) · Enter Settings (Press Light+Down Button) Assist Mode “DOWN” · Open WALK Assist mode · Cursor Down (With CD9/CD8/TT10/TT09 only) · Enter Settings (Press Light+Down Button) Assist Mode “UP” · Activate Walk Assist · Cursor Up (With CD9/CD8/TT10/TT09 only)

©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

AVS Electronics (HK) LTD

B.1 Button Operation (AVS Default)

Standalone Configuration

Keypad

Action

Power On Press + hold t= 3 sec

Light Mode

Press + hold

Press + hold

t= 3 sec

t= 3 sec

On

Off

Assist Mode Selection

Short press for Assist Mode selection

t 1 sec

Walk Assist Mode (bike speed 0 km/h) Press + hold Assist Mode down t= 3 sec Press + hold Assist Mode up to activate Walk off upon button release
Power Off Press + hold t= 3 sec
BLE Pairing Press + hold t= 5 sec. bike speed 0 km/h

NOVEMBER 2024

©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

AVS Electronics (HK) LTD

NOVEMBER 2024

Additional Configurations with CD9 or CD8 Center Display

Keypad

Action

Settings Mode

Press + hold

t= 5 sec. bike speed 0 km/h

Settings Operation – Cursor

Short Press t 1 sec.

Move cursor up/ down

Settings Operation ­ Select

Short Press t 1 sec.

Select/ Confirm

C.1 Light Sensor Operations

RC10 Standalone Configuration · Ambient light sensor controls brightness of: Backlight Button LED; LED Lightbar · IR light sensor controls bicycle lights

Configuration with CD9/CD8 · Ambient light sensor controls brightness of LCD backlight

D.1 Product Dimensions

©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

E.1 Location of Markings

AVS Electronics (HK) LTD

NOVEMBER 2024

F.1 Disposal and Recycling
This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. For more information, contact the Electronic Industries Alliance at www.eiae.org.
DISPOSAL: Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

AVS Electronics (HK) LTD

NOVEMBER 2024

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. o Consult the dealer or an experienced radio/TV technician for help.
H.1 Manufacturer Details (Smart Remote Controller)
AVS Electronics (HK) Ltd 16D Hollywood Centre, 77-91 Queens Road West, Sheung Wan, Hong Kong S.A.R.

©Copyright 2024. AVS Electronics (HK) LTD & AVE Mobility (TW) LTD. All Rights Reserved. Values, weights and dimensions shown are approximate. Errors and omissions accepted. Specifications are subjection to change without prior notice. V5.0 ­ 11012024.

Documents / Resources

avs AVS RC10 Smart LCD Remote Controller [pdf] User Guide
RC10VB1, 2AUYC-RC10VB1, 2AUYCRC10VB1, AVS RC10 Smart LCD Remote Controller, AVS RC10, Smart LCD Remote Controller, LCD Remote Controller, Remote Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *