AUTOOL AS502 Brake Fluid Tester User Manual

All rights reserved by AUTOOL TECH. CO., LTD. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of AUTOOL. The information contained herein is designed only for the use of this unit. AUTOOL is not responsible for any use of this information as applied to other units.

Neither AUTOOL nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with AUTOOL operating and maintenance instructions.
AUTOOL shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as original AUTOOL products or AUTOOL approved products by AUTOOL.

Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
AUTOOL disclaims any and all rights in those marks.

Trademark

Manual are either trademarks, registered trademarks, service marks, domain names, logos, company names or are otherwise the property of AUTOOL or its affiliates. In countries where any of the AUTOOL trademarks, service marks, domain names, logos and company names are not registered, AUTOOL claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of AUTOOL or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact AUTOOL by visiting AUTOOL at https://www.autooltech.com, or writing to aftersale@autooltech.com, to request written permission to use materials on this manual for purposes or for all other questions relating to this manual.

SAFETY RULES

General safety rules

Handling

PRODUCT INTRODUCTION

Technical specifications

PRODUCT STRUCTURE

Structure diagram

Interface display

OPERATIONS INSTRUCTION

Battery installation instructions

Inserting the Batteries

Open the battery cover on the back of the device.
Insert the batteries (4×1.5V AAA batteries), paying attention to the correct polarity.
Close the battery cover securely.

Operations

MAINTENANCE SERVICE

Our products are made of long-lasting and durable materials, and we insist on perfect production process. Each product leaves the factory after 35 procedures and 12 times of testing and inspection work, which ensures that each product has excellent quality and performance.

Maintenance

To maintain the performance and appearance of the product, it is recommended that the following product care guidelines be read carefully：

Be careful not to rub the product against rough surfaces or wear the product, especially the sheet metal housing.
Please regularly check the product parts that need to be tightened and connected. If found loose, please tighten it in time to ensure the safe operation of the equipment. The external and internal parts of the equipment in contact with various chemical media should be frequently treated with anti-corrosion treatment such as rust removal and painting to improve the corrosion resistance of the equipment and extend its service life.

Comply with the safe operating procedures and do not overload the equipment. The safety guards of the products are complete and reliable.
Unsafe factors are to be eliminated in time. The circuit part should be checked thoroughly and the aging wires should be replaced in time.
Adjust the clearance of various parts and replace worn (broken) parts. Avoid contact with corrosive liquids.

When not in use, please store the product in a dry place. Do not store the product in hot, humid, or non-ventilated places.

WARRANTY

From the date of receipt, we provide a three-year warranty for the main unit and all the accessories included are covered by a one-year warranty.

Warranty access

The repair or replacement of products is determined by the actual breakdown situation of product.
It is guaranteed that AUTOOL will use brand new component, accessory or device in terms of repair or replacement.

If the product fails within 90 days after the customer receives it, the buyer should provide both video and picture, and we will bear the shipping cost and provide the accessories for the customer to replace it free of charge. While the product is received for more than 90 days, the customer will bear the appropriate cost and we will provide the parts to the customer for replacement free of charge.

These conditions below shall not be in warranty range

The product is not purchased through official or authorized channels.
The product breakdown because the user does not follow product instructions to use or maintain the product.

We AUTOOL pride ourselves on superb design and excellent service. It would be our pleasure to provide you with any further support or services.

Product usage statement

Dear Esteemed User, Thank you for selecting our product.
Before you begin using it, we kindly ask you to carefully review the following product usage statement:

Data Referencing
Please note that all detection data and results provided by our product are for reference purposes only. Factors such as environmental conditions, operational variables, and device discrepancies may impact the accuracy of the data. While we strive for precision, we cannot guarantee 100% accuracy. Therefore, we advise users not to rely solely on this data for decision-making. It’s essential to consider vehicle usage, environmental conditions, and seek professional advice when interpreting the data.
Oil Testing
Please note that our product design and functionality do not encompass the testing of oils with special additives at the time of manufacture. If your oil contains particulate additives or similar substances, our product may not provide accurate readings or may not be suitable. And we recommend seeking professional service or using device specifically designed for testing oils with special additives in such cases.
Limitation of Liability
We want to emphasize that our company bears no legal responsibility for any direct, indirect, special, or consequential losses resulting from the use of our product’s detection data. This includes economic losses, business disruptions, or data loss. Users are advised to assume the associated risks when using the product.

Product Usage
To ensure optimal performance and longevity, please follow the instructions outlined in the product manual. Our company will not be held liable for any issues arising from misuse, abuse, or failure to adhere to the provided guidelines.
Continuous Improvement
We hereby retains the prerogative to amend product designs and specifications without prior notification. Consequently, it is advised that the actual appearance and color of the product may deviate from representations delineated in the manual, and therefore, the physical product should be regarded as the definitive reference. While exhaustive efforts have been exerted to ensure the precision of all descriptions within the manual, the possibility of discrepancies cannot be entirely discounted.

By acknowledging and understanding this product usage statement, you agree to its terms and conditions. If you have any questions or concerns, please don’t hesitate to reach out to our customer service team for further assistance.

RETURN & EXCHANGE SERVICE

Return & Exchange

If you are an AUTOOL user and are not satisfied with the AUTOOL products purchased from the online authorized shopping platform and offline authorized dealers, you can return the products within seven days from the date of receipt; or you may exchange it for another product of the same value within 30 days from the date of delivery.

Returned and exchanged products must be in fully saleable condition with documentation of the relevant bill of sale, all relevant accessories and original packaging.
AUTOOL will inspect the returned items to ensure that they are in good condition and eligible. Any item that does not pass inspection will be returned to you and you will not receive a refund for the item.
You can exchange the product through the customer service center or AUTOOL authorized distributors; the policy of return and exchange is to return the product from where it was purchased. If there are difficulties or problems with your return or exchange, please contact AUTOOL Customer Service.

EU DECLARATION OF CONFORMITY

We as the manufacturer declare that the designated product:
Brake Fluid Tester (AS502)
Complies with the requirements of the:

EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU + 2015/863 + 2017/2102
Applied Standards:
EN IEC 55014-1:2021, EN IEC 61000-3-2:2019+A1:2021, EN
61000-3-3:2013+A2:2021, EN IEC 55014-2:2021
IEC 62321-3-1:2013, IEC 62321-7-1:2015, IEC 62321-4:2013+A1:2017, IEC
62321-7-2:2017, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-8:2017
Certificate No.: HS202409277704E, HS202409277706E
Test Report No.: HS202409277704-1ER, HS202409277706-1ER

Read More About This Manual & Download PDF:

Documents / Resources

AUTOOL AS502 Brake Fluid Tester [pdf] User Manual
AS502, AS502 Brake Fluid Tester, AS502, Brake Fluid Tester, Fluid Tester, Tester

References

User Manual