Automatic Door Remote 33.92MHz Gate Control Remote User Manual

Automatic Door Remote 33.92MHz Gate Control Remote

Specification

Package List:

• 4 x Automatic Door Remote Control

Features

• Long Distance Control: The remote opener boasts an impressive operating range of up to 40 meters, providing users with the flexibility and ease of use they desire and ensuring that you can open doors from a distance without needing to be physically close.
• Convenient Keychain: Equipped with a keychain, this door remote opener can be effortlessly attached to bags or belts for easy access and storage. Its portable design ensures that you can carry it along wherever you go.
• Convenience: With remote control operation, users do not need to get out of the car or open the door manually, which enhances the convenience and efficiency of daily use.
• Premium Material: The remote control is designed using premium ABS and zinc alloy materials, ensuring both security and sturdy construction. This combination allows for long-term use, making it a dependable choice for controlling automatic doors.
• User-Friendly: The automatic door remote control is compact and easy to use, making it suitable for anyone. Its intuitive functionality ensures that everyone can operate it with minimal effort.

Installation

• Preparation: Ensure that the main gate receiver or automatic door opener control board is powered on and set to programming mode according to the manufacturer’s guidelines of the receiver unit.
• Accessing the Receiver Board: Remove the protective cover of the gate opener main unit to access the control board and locate the code learning or memory program button.
• Pairing the Remote Control: Press and hold the learn button on the receiver module for two seconds until the indicator LED lights up or flashes. While the LED is active, press and hold the desired button on the new remote control for two seconds. The indicator light on the receiver will flash rapidly or turn solid to confirm successful pairing.
• Testing the Configuration: Step away from the gate control board and press the programmed button on the remote control to test activation. The automatic door or gate mechanism should engage smoothly.

Usage Instruction

Chips could be copied

• Multi-functional and multi-variable, personalized and user-friendly, simple design and fast to use.
• This smart copy remote control is suitable for electric door remote control, telescopic door remote control, and garage door remote control. 2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207, HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630,HCS101, HCS200\HCS201(part code), part single chip microcomputer………. and so on.
• Different chip manufacturers have different prefixes for chip models, as long as the digital portion of the chip can be the same model.

Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.

Code cleaning method:

• Press the unlock button and lock button at the same time(some shells are the up button and down button).
• After the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressed, then push the released button three times; the LED indicator will enter into the fast-flashing status.
• At this time, all the memory data is cleared; the cleaned remote control will not have a lit LED indicator no matter which button you press.

Copy method

• One hand keeps the original remote controller, while the other keeps the copy remote control; the two remote controls should be placed as close as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), and then press down the copy button. When the LED indicator light flashes quickly after three flashes, this copy is successful; other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back on the copy remote control to operate. For the presence of noise, it should avoid interference. If the copy is not successful, it should be re-copied after clearing the code. (Attention: Your original remote control must be able to work and be the same frequency as our remote control)

The features of the new copy remote control

• The four buttons can respectively copy four different types of chips,
• That is a remote control can operate four different types of facilities.
• T Faster copy data speed, not easy losing code, longer distance.

Troubleshooting