AURATON Switch TWO Smart Relay Module User Manual

AURATON-logo

AURATON Switch TWO Smart Relay Module

AURATON-Switch-TWO-Smart-Relay-Module-product

The extended instruction can be found at:

https://manuals.auraton.pl

AURATON-Switch-TWO-Smart-Relay-Module-fig-2

 

Manufacturer
LARS Andrzej Szymański, Świerkowa 14,
64-320 Niepruszewo, POLAND
www.auraton.pl

Dimension

Installation of the device in installation boxes with a minimum depth of 60 mm.

AURATON-Switch-TWO-Smart-Relay-Module-fig-1

 

Roller Shutters and gates controller
AURATON Roller Shutter is a rotary drive controller with the possibility of changing the direction and adjusting the speed lock using limit switches, adapted to control roller shutters and gates.

Description of the device

  1. Connection terminals
  2. Signaling diode
  3. Button for pairing/removing the device from the systemAURATON-Switch-TWO-Smart-Relay-Module-fig-3

Connection diagram

  1. (N) neutral terminal
  2. (L) phase conductor terminal
  3. (O↓) control terminal
  4. (O↑) control terminal
  5. (I↓) switch terminal
  6. (l↑) switch terminal
  7. device controlled
  8. switchAURATON-Switch-TWO-Smart-Relay-Module-fig-4

Pairing the AURATON Switch ONE with the AURATON Box

AURATON-Switch-TWO-Smart-Relay-Module-fig-5

Technical data

  • AC supply voltage: 60-240 V AC, 50-60 Hz
  • DC supply voltage: 12-30 V DC
  • Maximum power consumption: ≤1 W
  • Standby power consumption: ≤0,4 W
  • Operating temperature range: 0 – 35°C
  • Weight limit: up to 4.3 A (<1kW) per channel, for resistive load
  • Security Type: External miniature circuit breaker with a maximum current of 10 A required
  • Control element: Electromagnetic relay with micro break
  • Control method: remotely – by radio locally – by pressing the button
  • Compatible with Internet getaway: AURATON Box
  • Operation range: approx. 30 m
  • Radio frequency: 868.150 MHz; 868.450 MHz
  • Radio signal strength: Up to 11 dBm
  • Radio receiver category: 2
  • Radio protocol: AURA
  • Security level: IP20
  • Dimensions [mm]: 48 x 35 x 19

Disposing of the devices

AURATON-Switch-TWO-Smart-Relay-Module-fig-6

The device is marked with a symbol of a crossed waste bin.
Pursuant to European Directive 2012/19/EU and to the Act on waste electrical and electronic equipment, such mark indicates that the device, at the end of its service life, must not be disposed of together with other household waste.
The user is responsible for delivering the devices to a reception point for used-up electric and electronic equipment.
Hereby, LARS Andrzej Szymanski declares that the radio equipment type AURATON Switch TWO is in compliance with Directive 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://manuals.auraton.pl

 

Frequently Asked Questions

Q: What is the maximum load supported by the AURATON Switch TWO?

A: The AURATON Switch TWO supports a maximum load of 1 W.

Q: What is the protection type of the AURATON Switch TWO?

A: The protection type of the AURATON Switch TWO is 0.4 W.

Documents / Resources

PDF thumbnailSwitch TWO Smart Relay Module
User Manual · Switch TWO Smart Relay Module, Switch TWO, Smart Relay Module, Relay Module, Module

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.