AURATON Flood Sensor
Description
Auraton Flood Sensor 2.0 is designed for the emergency cutting off water supply after detecting flooding in the controlled area. For proper operation of the system one Auraton Flood Sensor Valve and at least one Auraton Flood Sensor 2.0 is required (up to 10 sensors).
- Flooding sensors
- Operation control lamp
- Function button
- Magnet used to activate matching function of the Flood Sensor Valve
INSTALLATION
Technical specifications
| Specification | Details |
|---|---|
| Model | Auraton Flood Sensor 2.0 |
| Working Temperature Range | 1–45°C |
| IP Rating | IP65 |
| Working Mode Control | LED, sound signal |
| Power Supply | Replaceable CR2032 battery |
| Compatible with Internet Gateway | Auraton Box |
| Radio Frequency | 865.500 MHz, 867.200 MHz, 868.150 MHz, 868.450 MHz, 869.800 MHz |
| Radio Signal Strength | 11 dBm |
| Radio Receiver Category | 2 |
| Operation Range | In a building – up to 50 m |
MORE INFO
Disposing of the devices
The devices are marked with the crossed waste bin symbol. According to European Directive no. 2012/19/EU and the Act concerning used up electric and electronic equipment, such a marking indicates that this equipment may not be placed with other household generated waste.
The user is responsible for delivering the devices to a reception point for used-up electric and electronic equipment.
Hereby, LARS Andrzej Szymański declares that the radio equipment type Auraton Flood Sensor 2.0 is in compliance with Directive 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://manuals.auraton.plA
Documents / Resources
 | Flood Sensor |
References
- manuals.auraton.plmanuals.auraton.pl
- manuals.auraton.plmanuals.auraton.pl
- User Manualmanual.tools