aultop ATMS6002WM WiFi Smart Meter
Product Usage Instructions
- Download and Install Mobile App Connect your phone to local Wi-Fi first. Use your phone to scan the QR code below to Download and install the App.
- Register Account
- Add New Device
- Connect the Device with mains supply(100-250VAC), for the connection diagrams see section 14.
- Press and hold the button for about 5 seconds until the Blue Led blinks fast.
- TheApp can display: Power (W), Current (mA), Voltage (V),
- Daily Consumption: (KWh)
- Monthly Consumption: (KWh) Total Consumption:(KWh)
- Switch ON/ OFF
- Expense management (Not needed if Prepayment function not in use)
- Set Scheduled Programs
- Setting Over-current alarm
- Setting Over-voltage alarm and Under voltage alarm
- Set Insufficient balance warning
- Set Lack of Power Alarm
- Modify Device Icon
- Create Group
- Share Device
- Add to Home Screen
- Connection Diagrams
- Dimensions
Specification
- Rated Voltage: 100-240VAC 50-60Hz
- Rated Current: 5A 250VAC(Cosφ=1)
- Maximum current: 50 Hz/ 60A
- Contact Configuration: 1NO(SPST-NO)
- Wi-Fi Frequency: 2.4GHz
- Pulse frequency: 1200imp / kwh
- Ambient temperature range: -10° (+60°C)
- Can set 30 ON/OFF programs per day or per week.
- Can be shared with 20 users by Mobile App.
Feature
- Under normal conditions of use, the life of LCD screen is more than 10 years.
- Single phase type multi-function smart meter designed to measure single phase 2 wire AC active energy and other parameters.
- APP can be used to remotely monitor readings and control ON/OFF.
- Ultra-bright long-life LED indicator.
FAQs
- Q: How do I set up scheduled programs?
- A: Click on “Schedule” in the home page and add your desired schedules.
- Q: How can I receive insufficient balance warnings?
- A: Set up the Insufficient Balance Warning in the settings to receive alerts.
Documents / Resources
 |
aultop ATMS6002WM WiFi Smart Meter [pdf] Instruction Manual ATMS6002WM, ATMS6002WM WiFi Smart Meter, ATMS6002WM, WiFi Smart Meter, Smart Meter, Meter |