AUDIO ARRAY AM-W12 UHF Dual Wireless Microphone
ACCESSORIES
INSTRUCTIONS
- Microphone head Section:
Including Microphone Cover Net and Microphone Cartiridge Module. - Display Screen:
Display working channels, battery power, frequency. - Switch button:
Press for 3 seconds on/off the microphone. - Frequency adjust button.
- POWER BUTTON
- USB CHARGING PORT
- SIGNALANTENNA
- BATTERY INDICATOR
- RF LIGHT
LIGHT INSTUCTION
|
Battery indicator (4) |
Turns red and flashes quickl | The power of the receiver is in a low battery status. |
| Stays on | The receiver is in charging model. | |
| Turns off | The receiver is fully charged. | |
|
RF light (5) |
Flashes slowly | The receiver is not connected to the microphone. |
| Stays on | The receiver and microphone are successfully connected. | |
| Flashes quick | The receiver and microphone are successfully connected, and the microphone is transmitting audio signals. |
SPECIFICATIONS
- Type: Dynamic
- Frequency Response: 50Hz-16KHz
- Polar Pattern: Cardioid
- Output Impedance: 6000
- Sensitivity: -52dB±1.5dB
- S/N Ratio: 96dB
- Input Sample Rate: 48KHz
- Bit Rate: 24bit
- THD+N: 0.05%
NOTES
When using this device, keep it away from water.
Use the device in ventilated environment, keep it away from fire.
Since it’s a wireless device, please keep it away from other interfering sources.
Don’t take apart the device.
Please use the standard power supply, high voltage may damage the device.
Please place the used batteries into the recycle bin, don’t litter them.
Customer Support
support@audioarray.in
audioarray.in
/c/AudioArray
audioarray.in
audioarray.in
audio_array
Documents / Resources
 |
AUDIO ARRAY AM-W12 UHF Dual Wireless Microphone [pdf] Instruction Manual AM-W12, AM-W12 UHF Dual Wireless Microphone, UHF Dual Wireless Microphone, Dual Wireless Microphone, Wireless Microphone, Microphone |
