Auckly AX 2BELV-AX Indicator Light
How to charge Properly?
Guide
Indicator Light Guide
If an error is detected:
- Check that your phone supports wireless charging and does not have any credit cards, stands, or other metal attachments on the back (other than the magnetic ring).
- After checking the above, unplug and plug in the charging cable again to resume normal charging.
Important Reminders
- Compatible with MagSafe-enabled iPhones and cases.
- This charger supports an input of 9V=2A and outputs a maximum of 15W.
- Only use the cable provided with the charger. An Apple cable or other third-party cable may interfere with charging.
- This charger requires a charging adapter that supports OC or PD fast charging and an output of at least 18W.
- Charger must be plugged into power supply to charge devices.
Safety Warnings
- Do not place the device in temperatures below 0°C (32°F) or above 60°C (140°F).
- Do not attempt to disassemble the device, expose it to an open flame, or submerge it in water to avoid damaging the device.
- Always check for damage to the device, cables, or other accessories before using the device. If damaged, do not use the device.
- Do not attempt to disassemble or modify the device in any way, as it may cause serious damage and void the warranty.
- Do not expose the device to extremely hot, humid, or corrosive environments to avoid damaging the device.
Documents / Resources
 |
Auckly AX 2BELV-AX Indicator Light [pdf] User Guide AX 2BELV, AX 2BELV-AX, AX 2BELV-AX Indicator Light, Indicator Light, Light |