ATOMSTACK B3 Laser Enclosure With Camera Instruction Manual

ATOMSTACK B3 Laser Enclosure With Camera

Product Specifications

• Product Name: B3 Protective Box
• Model Number: F03-0230-0AA1 V:2.0
• Compatibility: A6 Pro/ A12 Pro/ A24 Pro/ X12 Pro/ X24 Pro

Product Usage Instructions

Disclaimer:

This product is a protection box designed for users over 15 years old. Keep the laser module out of reach of children. Use caution when operating around children.

Installation:

Users who purchase the B3 case separately need to install the wiring by themselves. Users who purchase the A6 Pro/ A12 Pro/ A24 Pro/ X12 Pro/ X24 Pro with the box do not need this step.

Packing List:

• Top component
• Front component
• Rear component
• Extraction hose
• Left component
• Right component
• Hose clamp
• Gravity switch
• Cross screwdriver
• M4*10 screws x 16pcs
• M4*5 screws x 8pcs

Frequently Asked Questions

Q: What age group is this product suitable for?

A: This product is not a toy and is not suitable for individuals under 15 years of age.

Q: Is the B3 Protective Box compatible with all models?

A: The B3 Protective Box is currently only compatible with the following models: A6 Pro/ A12 Pro/ A24 Pro/ X12 Pro/ X24 Pro.

Q: Do I need to install the wiring if I purchase specific models with the box?

A: No, users who purchase the A6 Pro/ A12 Pro/ A24 Pro/ X12 Pro/ X24 Pro with the box do not need to install the wiring themselves.

Disclaimer

• This product is not a toy and is not suitable for people under 15 years of age. Do not allow children to touch the laser Module. Please be careful when operating in aituation invotving children.
• This product is a protection box, visit https://www.atomstack.net/pages/user-guides for complete “user manual” and the latest instructions and warnings. AtomStack reserves the right to update this Disclaimer and Safe Operation Guidelines.
• Please be sure to read this document carefully before using the product to understand your legal rights, responsibilities and safety instructions; Otherwise, it may bring property loss, safety accident and hidden danger of personal safety. Once you use this product, you shall be deemed to have understood and accepted all terms and contents of this document. User undertakes to be responsible for his or her actions and all consequences arising therefrom. User agrees to use the Product only for legitimate purposes and agrees to all terms and contents of this document and any relevant policies or guidelines that AtomStack may establish. You understand and agree that AtomStack may not be able to provide you with the cause of the damage or accident and provide you with AtomStack’s after-sale service unless you provide the original engraving or cutting files, engraving software configuration parameters used, operating system information, video of the engraving or cutting process, and operational steps prior to the occurrence of a problem or failure.
• AtomStack is not liable for any and all losses arising from the user’s failure to use the product in accordance with this manual.
• AtomStack has the ultimate right to interpret the document, subject to legal compliance. AtomStack reserves the right to update, modify, or terminate the Terms without prior notice.
• The B3 Protective Box is currently only compatible with the following models:A6 Pro/ A12 Pro/ A24 Pro/ X12 Pro/ X24 Pro

Packing list

INSTALLATION

1. Users who purchase the B3 case separately need to install the wiring by themselves, and users who purchase the A6 Ultral / A12 Ultral / A24 Ultral with the box do not need this step

   

2. Install the left and right components using 8 M4*5 screws
3. Connect the control wire

   

4. Install the back component using 6 M4*10 screws

   
5. Install the top component using 7 M4*10 screws

   

6. Install the front component using 3 M4*10 screws

   

7. Install the hose clamp and exhaust hoses

   
8. Install the silicone plug1, and connect the power cord 2 for the switch

   

9. Product Display

   

• Scan QR code: QR code reader/barcode scanner or any app with a scanner
• Customer service: For detailed warranty policy, please visit our official website: www.atomstack.net
• For technical support and service, please email support@atomstack.net
• Manufacturer: Shenzhen AtomStack Technologies Co.,Ltd
• Address: 202, Building 1, Mingliang Technology Park, No. 88 Zhuguang North Road, Taoyuan Street, Nanshan District, Shenzhen, Guangdong, China