ATOLL DA200 Digital Input Board
INSTALLATION DIGITAL BOARD FOR IN & PR SIGNATURE
Before any operation, switch off your appliance.
- Unscrew the rear plate (3 screws).
- Place the plastic button (hiding the Bluetooth antenna) and fix the board on the chassis.
- Connect the flat cable on the main board connector.
In case of IN50, 80, 100 and PR200 Signature it is necessary to wait 5 seconds of initialization before being able to exit standby at the first power on.
Reminder: The DA200 digital board includes
- 1 Bluetooth receiver.
- 2 Coaxial inputs (24 bits/192 kHz).
- 2 Optical inputs (24 bits/192 kHz).
- • 1 USB-B input: PCM (16 bits to 32 bits up to 384 kHz) & DSD (64 & 128).
To use the USB-B asynchronous input, you need to download a driver on your computer using Windows software. You can find it here:
https://www.atoll-electronique.com/fr/produits/ampli-preampli-integres/integre-in300-copy/
Documents / Resources
 |
ATOLL DA200 Digital Input Board [pdf] Installation Guide DA200, Digital Input Board, DA200 Digital Input Board, Input Board, Board |
