ATEN IC164 Non-Powered / High Speed Parallel Data Extender Installation Guide
Package Contents
Qty |
Description |
1 |
IC164 Non-Powered / High Speed Parallel Data Extender |
1 |
RJ-11 4-wire telephone cable |
1 |
user instructions |
Hardware Overview
- RJ-11 port
- power jack
- DB-25 male connector (PC)
- Centronics 36-pin male connector (printer)
Installation
- Connect the IC164T’s DB-25 male connector to the PC’s parallel port.
- Connect one end of the RJ-11 4-wire telephone cable to the RJ-11 port of the IC164T, and then connect the other end to the RJ-11 port of the IC164R.
- Connect the IC164R’s Centronics 36-pin male connector to the printer’s parallel port.
- Power on the printer and PC, and the IC164T and IC164R are now ready to use.
All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
Troubleshooting
Problem |
Resolution |
Failure of data transmission |
|
Documents / Resources
![]() |
ATEN IC164 Non-Powered / High Speed Parallel Data Extender [pdf] Installation Guide IC164, Non-Powered High Speed Parallel Data Extender, High Speed Parallel Data Extender, Parallel Data Extender, Data Extender |