Installation Guide for ATEN models including: IC164, Non-Powered High Speed Parallel Data Extender, High Speed Parallel Data Extender, Parallel Data Extender, Data Extender

IC164 Non-Powered / High Speed Parallel Data Extender

Connect the IC164T's DB-25 male connector to the PC's parallel port. 2. Connect one end of the RJ-11 4-wire telephone cable to the RJ-11 port of the IC164T, ...

IC164 ig 2021-04-20 (492.42 KB)

Non-Powered / High Speed Parallel Data Extender - IC164, ATEN Industry Controls | 北京宏正腾达科技 Quick Start Guide

Non-Powered / High Speed Parallel Data Extender - IC164, ATEN Industry Controls | 北京宏正腾达科技

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 2 Pages, 492.42KB

IC164 Non-Powered / High Speed Parallel Data Extender

Installation Guide

Package Contents

Qty

Description

1

IC164 Non-Powered / High Speed Parallel Data Extender

1

RJ-11 4-wire telephone cable

1

user instructions

MISC10000023 04/2021 V1.0

Hardware Overview
1. RJ-11 port 2. power jack 3. DB-25 male connector (PC) 4. Centronics 36-pin male connector (printer)

Installation

1. Connect the IC164T's DB-25 male connector to the PC's parallel port. 2. Connect one end of the RJ-11 4-wire telephone cable to the RJ-11 port of the IC164T, and then connect the other
end to the RJ-11 port of the IC164R. 3. Connect the IC164R's Centronics 36-pin male connector to the printer's parallel port. 4. Power on the printer and PC, and the IC164T and IC164R are now ready to use.
All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer. Please visit our website to find the most up-to-date version.

Troubleshooting
Problem Failure of data transmission

Resolution 1. Make sure the RJ-11 4-wire telephone cable is firmly connected to the IC164T and IC164R. 2. Make sure the printer is powered on and ready to use. 3. The IC164 only extends data transmission from PC to printer. Make sure the interface of PC and printer are compatible, and use appropriate adapters for interface conversion if required. 4. The IC164 devices may not have sufficient power supply. Plug a power adapter

of 9V DC, 50mA (min) with positive polarity the IC164R.

to the power jack on

Note: The power adapter is not provided in the package.

5. The problem may be caused by an improper printer reset. Please reset the

IC164R by re-plugging the IC164R from the printer and RJ-11 4-wire telephone

cable from the IC164R.

All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer. Please visit our website to find the most up-to-date version.