astrum MX PRO Bluetooth Headset User Manual

Bluetooth Headset
Astrum MX PRO
User Manual

MX PRO Bluetooth Headset

Imported & Distributed by
ASTRUM TECH INC.
www.astrumtech.com
Made in China
IMPORTER: Astrum Tech Inc, 3580 Wilshire Blvd Suite 770,Los Angeles, CA 90010, USA

Product Overview

Button	Function	Operation
ANC Switch	ANC function on / off	Slide the ANC switch to activate or deactivate the ANC mode
MFB Button	Power on / off	Press and hold MFB button for 3s
	Pairing	Under power off mode, press and hold MFB button for 5s till the LED indicator blinks RED and BLUE alternatively
	Answer / end a call	Press MFB button once
	Reject a call	Press MFB button twice to reject a call coming
	Voice assistant	Long press MFB button and release the MFB button to activate the voice assistant from your smart phone
	Redial last number	Press MFB button twice under bluetooth connection status
	Clear pairing history	From off, long press MFB button until the LED indicator shows PURPLE for 2s
Touch Panel	Play music	Quick tap the touch panel twice
	Pause music	Quick tap the touch panel twice
	Volume up	Vertically slide up
	Volume down	Vertically slide down
	Next track	Horizontally slide forward
	Previous track	Horizontally slide backward
SensorProximity	Play (Music only, not for call)	Take on the headsets
SensorProximity	Pause (music only, not for call)	Take off the headsets

Basic Operations

Pair With The Mobile Phone

Long press the MFB button for 5s until the LED indicator blinks RED & BLUE alternatively.
Turn on the Bluetooth function on your mobile device, search and connect with ASTRUM Mx PRO. The headsets will soon be connected with your mobile device.

Reconnection
ASTRUM MX PRO will automatically connect with the last paired device, simply turn on your device’s Bluetooth function and the ASTRUM MX PRO will connect instantly when powered on.
Activate / Deactivate The ANC Mode
Switch the ANC button to ON side to significantly reduce the ambinent noise.
Switch the ANC button to OFF side to deactivate the ANC function,
Activate / Deactivate The Ambient Mode
When ANC is ON, press the ambient button once to activate the ambient mode,
Press once again to deactivate the mode.
Ambient mode provides the convenience for hearing the ambient sound without taking off the headsets,

FAQ

1) What is ANC?

ANC stands for “active noise cancellation’-this feature is designed to eliminate ambient noise in your environment allowing you to enjoy your music without distraction while working, traveling or simply relaxing. It is most effective at reducing LOW frequency noises such as those from an airplane engine or a large crowd (frequencies from 20HZ-800HZ).

2) Why do I still hear certain noises with ANC on?

The ANC feature is best at reducing constant / steady LOW frequency sounds. Sudden irregular noises such as shouting or car horns are not as effectively cancelled out.

3) Does ASTRUM MX PRO “AMBIENT Mode” work as hearing aid?

No, it is not a hearing aid. ASTRUM Mx PRO is designed to capture the main audio frequency in noisy environment.

4) Why there is still an audio delay?

Audio latency might still exist when your device transmits unstable Bluetooth signals. To achieve the best sound performance, please make sure your mobile device also suports aptX Low Latency.

5) Can | still use my Headsets if the battery has run out?

Yes, when the battery drains, you can use the 3.5mm audio cable to stream the music. Note: The buttons on the headsets will not work under wired connection.

Documents / Resources

MX PRO Bluetooth Headset

User Manual · 2BFJ5-ASTRUMMXPRO, 2BFJ5ASTRUMMXPRO, astrummxpro, MX PRO Bluetooth Headset, MX PRO, Bluetooth Headset, Headset

References

User Manualmanual.tools

Published: January 6, 2025