604592 Stop Go Polarity Indicator Lamp
“
Product Information
Specifications:
- Product Name: Stop Lite
- Models: 604592, 604579, 610111
- Manufacturer: Associated Equipment Corporation
- Usage: Starting table safety clamps, chargers
Product Usage Instructions
Installing Stop Lite in Clamp with Terminal Tab or Stainless
Steel Guide:
- Attach the female fasten on Stop Lite to the terminal tab on
the stainless steel guide in the negative clamp. - Install Stop Lite into the clamp handle and crimp tabs around
the Stop Lite securely.
Note: If the stainless steel guide or copper
jaw is damaged, both should be replaced with a 620 Clamp Jaw Repair
Kit.
Associated Equipment Corporation
1555 Salzman Avenue, St. Louis, MO 63133
ECN 1319 PIN 27-A8 9
FAQ (Frequently Asked Questions)
Q: Can Stop Lite be used on any type of charger?
A: The 604579 Stop/Go Lite is specifically designed for use on
chargers. Ensure proper installation as per the instructions
provided.
Q: What should I do if the stainless steel guide in the
negative clamp is damaged?
A: In case of damage to the stainless steel guide, it is
recommended to replace it along with the copper jaw using a 620
Clamp Jaw Repair Kit for optimal performance.
“`
604592., 604579 AND 610111 STOP LITE
ASSOCIATED
INSTALLATIQN,- INSTRUCTIONS
L ….
610111 Stop Lite is used in Pluq-in Starting t~ble Safety Clamps .
.604579 Stop/Go Lite is used on chargers, HUST BE INSTAL LED .IN NEGATIVE CLAMP
·60~592 Stop Lite is used in Booster Cable Safety Clamps.
INSTALLING STOP LITE~ CLAMP WITHOUT~ TERMINAL TAB Q!! STAINLESS STEEL GUIDE.
1. Drill out rivet in stainless steel guide in negative clamp.
2. Reinstall stainless steel guide using terminal · tab, nylon insulating
busing, screw, and nut supplied with Stop Lite, in the sequence
-..
i111:1st,ated below. ·· ·
-~–
NOTE: If stainless steel guide or copper jaw is damaged , both should be replaced with a 620~ Clamp Jaw Repair K~t.
SCREW—————–ii
—-~~I
NYLON INSULATING BUSHING
TERMINAL TAB– – – – – : – – – – -~ ~
——-ltff STAINLESS STEEL GUIDE
~
I
CLAMP HALF
ACORN NlJi – -=———‘——-==
3. Attach female fasten on Stop Lite to term i nal tab in clamp jaw.
4. Install . Stop Lite_·into cl~mp handle and crimp t·abs around St op l.ite.
INSTALLING STOP LITE IN CLAMP JITH TERHll~Al TAB OR STAINLESS STEEL GLIIDE. 1. Attach the female fasten on Stop Lite to t he ter~inal tab on the stainless
steel guide In the negative clamp . 2. Install Stop Lite into clamp handle and crimp tabs around Stop Lite.
ASSOCIATED EQUI PHENT CORPORATION 1555 SALZMAN AVENUE, ST. LOU IS HO. 63133
ECN 1319 PIN 27-A8 9
Documents / Resources
 |
ASSOCIATED 604592 Stop Go Polarity Indicator Lamp [pdf] Installation Guide 604592, 604579, 610111, 604592 Stop Go Polarity Indicator Lamp, 604592, Stop Go Polarity Indicator Lamp, Go Polarity Indicator Lamp, Polarity Indicator Lamp, Indicator Lamp |