SHA CERLIN LED Queen Bed Frame User Manual

1. Introduction

Thank you for purchasing the SHA CERLIN LED Queen Bed Frame. This modern bed frame features a 51.2-inch tall upholstered headboard, integrated RGB LED lighting, a convenient charging station, and a 2-tier storage shelf. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new bed frame.

Figure 1: SHA CERLIN LED Queen Bed Frame (Grey)

This image displays the complete SHA CERLIN LED Queen Bed Frame in grey, showcasing its tall headboard with integrated LED lighting and storage shelf, along with the upholstered frame and wooden slats.

2. Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
• Assemble the bed frame on a soft, clean surface (e.g., carpet) to prevent scratching.
• Two adults are recommended for assembly.
• Tighten all screws and bolts securely, but do not overtighten. Re-tighten periodically.
• Do not allow children to climb or play on the bed frame.
• Keep electrical components (LED lights, charging station) away from water and moisture.
• Only use the charging station for its intended purpose. Do not overload the outlets.
• Maximum weight capacity is 900 pounds. Do not exceed this limit.

3. Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

• Headboard with integrated LED strip lights, charging station, and storage shelf
• Side rails (Left and Right)
• Footboard
• Center support beam(s)
• Wooden slats with Velcro attachments
• Support legs
• Hardware pack (screws, bolts, washers, Allen wrench)
• Power adapter for LED lights and charging station
• Remote control for LED lights
• Instruction Manual (this document)

Figure 2: Example of bed frame components

This image illustrates various components of a bed frame, including the headboard, side rails, footboard, support legs, and wooden slats, similar to what is included in the package.

4. Setup and Assembly

Assembly is designed to be straightforward. All necessary parts, tools, and instructions are included. We recommend two people for easier assembly.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a soft, clean surface. Compare them with the package contents list to ensure everything is present.
2. Assemble the Frame: Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
3. Install Center Support: Attach any center support beams and legs to the frame as indicated in the specific instructions provided in your package.
4. Attach Slats: The wooden slats are designed for easy installation with Velcro connections. Lay the slats across the frame and press down firmly to secure them to the Velcro strips on the side rails. Ensure even spacing.
5. Connect Electrical Components: Locate the power cable for the LED lights and charging station. Connect it to the appropriate port on the headboard and then plug the power adapter into a wall outlet.
6. Final Check: Double-check all bolts and screws to ensure they are tight. Place your mattress on the assembled frame.

Figure 3: Easy Assembly Slats

This image highlights the easy assembly feature of the bed slats, showing how they connect securely to the frame, likely with Velcro or similar quick-connect mechanisms.

Figure 4: Noise-Free Foam Application

This image shows the application of noise-reducing foam on the bed frame components, indicating a design feature to prevent creaking and ensure a silent sleeping experience.

5. Operating Instructions

5.1. RGB LED Lighting

The integrated RGB LED strip lights can be controlled via the included remote control or a compatible smartphone application.

• Power On/Off: Use the power button on the remote or app to turn the lights on or off.
• Color Selection: Choose from over 60,000 colors using the color wheel or preset color buttons.
• Brightness Adjustment: Increase or decrease the light intensity.
• Dynamic Modes: Select from various modes such as fade, flash, strobe, or smooth transitions.
• Music Sync: Some modes allow the lights to sync with music played through your device or detected by a built-in microphone.
• Timer Function: Set a timer for the lights to automatically turn off.

Figure 5: LED Remote Control

This image displays the remote control used to operate the RGB LED lights, showing various buttons for color selection, mode changes, and brightness adjustments.

5.2. Built-in Charging Station

The headboard features a convenient 4-in-1 charging station to power your devices.

• 2 AC Outlets: For standard electrical plugs (125V/12A).
• 1 USB Port: For charging USB-powered devices (5V/3A).
• 1 Type-C Port: For charging USB-C powered devices (5V/3A).

Simply plug your device's charging cable into the appropriate port. Ensure the bed frame's power adapter is plugged into a live wall outlet for the charging station to function.

Figure 6: Charging Station Detail

This image provides a close-up view of the integrated charging station on the headboard, clearly showing the two AC outlets, one USB port, and one Type-C port.

6. Maintenance

• Cleaning the Upholstery: For general cleaning, gently vacuum the velvet fabric with a brush attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first. Do not use harsh chemicals or abrasive cleaners.
• Cleaning the Frame: Wipe metal and wood surfaces with a soft, damp cloth. Dry immediately.
• Electrical Components: Keep the charging station and LED lights free from dust. Do not use liquid cleaners directly on electrical parts.
• Hardware Check: Periodically check all bolts and screws and tighten them if necessary to maintain stability.

7. Troubleshooting

8. Specifications

Figure 7: Product Dimensions

This diagram provides detailed measurements of the SHA CERLIN Queen Bed Frame, including overall length, width, headboard height, and other key dimensions.

9. Warranty and Support

For warranty information, technical support, or assistance with missing/damaged parts, please contact SHA CERLIN customer service directly or refer to the seller's return and warranty policy where you purchased the product.

You can visit the official SHA CERLIN store for more information: SHA CERLIN Store