ASKGO G26 Electric Bike User Manual

1. Important Safety Information

Read this manual thoroughly before operating the ASKGO G26 Electric Bike. Failure to follow instructions and safety guidelines may result in serious injury or property damage. Keep this manual for future reference.

• Always wear a helmet and appropriate safety gear when riding.
• Ensure all components are securely fastened before each ride.
• Do not ride under the influence of alcohol or drugs.
• Observe all local traffic laws and regulations.
• Avoid riding in adverse weather conditions, such as heavy rain or snow.
• Do not exceed the maximum load capacity of 265 pounds (120 kg).
• Keep hands and feet away from moving parts.

2. Package Contents

Verify that all items are present in the package upon unboxing:

• ASKGO G26 Electric Bike (partially assembled)
• Battery Charger
• User Manual
• Assembly Tools (if included)

Image: The ASKGO G26 Electric Bike, showcasing its compact design and a rider. This image represents the complete product after assembly.

3. Setup and Assembly

The ASKGO G26 Electric Bike requires some assembly before its first use. Follow these steps carefully:

1. Unboxing: Carefully remove the bike and all components from the packaging. Retain the original box for the first month in case of returns.
2. Unfolding the Bike:
   • Locate the folding mechanism on the frame.
   • Release the safety latch and unfold the frame until it locks into place.
   • Secure the handlebar stem in an upright position.
   • Adjust the seat post to your desired height and secure it.
3. Handlebar Installation: Attach the handlebars to the stem, ensuring they are centered and tightened securely.
4. Pedal Installation: Identify the left (L) and right (R) pedals. Thread them into the crank arms by hand, then tighten with a wrench. Note that the left pedal tightens counter-clockwise.
5. Initial Battery Charge: Before the first ride, fully charge the battery. Refer to the "Battery Care and Charging" section for detailed instructions.
6. Pre-Ride Check: Before each ride, inspect the brakes, tire pressure, and ensure all bolts and quick releases are tight.

Image: Illustration of the three-step quick fold mechanism, demonstrating how the bike can be made compact for storage or transport.

4. Components Overview

Familiarize yourself with the main components of your ASKGO G26 Electric Bike:

• Motor: 1200W peak power high-speed brushless motor, integrated into the rear wheel hub.
• Battery: 48V 10AH (480WH) detachable lithium battery, located under the seat.
• Display: Liquid Crystal Display (LCD) on the handlebars for speed, battery level, and riding mode.
• Brakes: Front and rear dual disc brake system for reliable stopping power.
• Suspension: Multi-suspension system including front fork damping, center shock, and rear shock absorbers.
• Tires: 14-inch puncture-resistant pneumatic tires.
• Lights: Bright LED headlights, brake light, and warning lights for visibility.

Image: Detailed view of the 1200W high-energy brushless motor, highlighting its internal structure and power specifications.

Image: Close-up views of the multi-vibration damping system, showing the fork damping, center shock, and rear shock components.

5. Operating Instructions

5.1 Powering On/Off

• To power on, press and hold the power button on the LCD display until the screen illuminates.
• To power off, press and hold the power button again until the display turns off.

5.2 Riding Modes

The ASKGO G26 offers three riding modes:

1. Throttle Mode: Engage the throttle on the handlebar to accelerate without pedaling. This mode provides full electric power.
2. Pedal Assist Mode (PAS): The motor provides assistance as you pedal. You can adjust the level of assistance (usually 1-3 or 1-5, depending on the display settings) using the control buttons. This mode extends battery range.
3. Walk Assist Mode: When activated, the bike moves at a slow, steady pace (typically 3-4 mph) to assist you when walking alongside it.

Image: Visual representation of the three riding modes: Throttle Mode, Pedal Assist, and Walk Assist, illustrating their use in different environments.

5.3 LCD Display Functions

The Liquid Crystal Display provides essential riding information:

• Battery Level Display: Shows the remaining battery charge.
• Speed Display: Indicates current riding speed.
• Gear Adjustment: Allows selection of pedal assist levels.
• One-Touch Power On/Off: Controls the bike's power.
• Current Status: Displays active riding mode or other indicators.

Note on Speed and Units:

• To reach 20MPH in Pedal Assist mode: Double-click the "M" button (or equivalent on your display) to switch speed modes.
• To switch from Kilometers to Miles: Triple-click the "M" button (or equivalent) to change unit measurements.

Image: Close-up of the Liquid Crystal Display (LCD) on the handlebar, detailing indicators for battery charge, speed, gear adjustment, and power controls.

5.4 Safety Features

The ASKGO G26 is equipped with safety features for enhanced visibility:

• LED Headlights: Provide illumination for night riding.
• Brake Light: Activates when brakes are applied.
• Warning Lights: Enhance rear visibility.

Image: Depiction of the bike's safety lighting system, including the bright LED headlight and the rear brake and warning lights, ensuring visibility.

6. Battery Care and Charging

Proper battery care ensures longevity and optimal performance.

6.1 Charging the Battery

1. Ensure the bike is powered off before charging.
2. The battery can be charged while installed on the bike or removed.
3. Connect the charger to the charging port on the battery.
4. Plug the charger into a standard wall outlet.
5. The charger indicator light will typically show red during charging and turn green when fully charged.
6. A full charge takes approximately 4 hours. Do not overcharge the battery.

6.2 Battery Removal

The detachable battery design allows for flexible charging and storage:

1. Locate the battery lock mechanism (usually with a key).
2. Unlock and carefully slide the battery out from its compartment.
3. When re-installing, ensure the battery is securely seated and locked into place.

Important:

• Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for extended periods, charge the battery to 50-70% every 1-2 months.

7. Maintenance

Regular maintenance is crucial for the performance and safety of your electric bike.

7.1 Daily Checks (Before Each Ride)

• Tires: Check tire pressure. Ensure tires are free from cuts or punctures.
• Brakes: Test front and rear brakes for proper function and responsiveness. Ensure brake levers are not spongy.
• Fasteners: Verify all quick releases, bolts, and nuts are tight.
• Battery: Check battery charge level.

7.2 Weekly/Monthly Checks

• Chain: Inspect the chain for rust or wear. Lubricate as needed.
• Cables: Check brake and throttle cables for fraying or damage.
• Lights: Ensure headlights and taillights are functioning correctly.
• Frame: Inspect the frame for any cracks or damage.

7.3 Cleaning

• Use a damp cloth to wipe down the frame and components.
• Avoid using high-pressure washers directly on electrical components.
• Do not submerge the bike or battery in water.

8. Troubleshooting

This section addresses common issues you might encounter with your ASKGO G26 Electric Bike.

9. Specifications

Image: A diagram illustrating the key dimensions and parameters of the ASKGO G26 Electric Bike, including recommended height, maximum load, and bike weight.

10. Warranty and Support

Your ASKGO G26 Electric Bike is covered by a manufacturer's warranty.

• Warranty Period: 1 Year Manufacturer Warranty.
• Return Policy: 30-day return policy. Please retain the original packaging for the first month.
• Support: For any issues or inquiries, please contact ASKGO customer support. Provide a description of the issue and any relevant photos. Support typically responds within 24 hours.
• Contact Information: Refer to the contact details provided with your purchase documentation or visit the official ASKGO website.