Orient Electric 1200 Aerosilent BLDC RF 260

Orient Electric Aerosilent 1200mm BLDC Ceiling Fan User Manual

Model: 1200 Aerosilent BLDC RF 260

Introduction

The Orient Electric Aerosilent 1200mm BLDC Ceiling Fan is engineered for quiet operation and efficient air delivery. This manual provides essential information for the safe installation, operation, and maintenance of your fan.

Orient Electric Aerosilent 1200mm BLDC Ceiling Fan in Dune Gold

Image: The Orient Electric Aerosilent 1200mm BLDC Ceiling Fan in Dune Gold, showcasing its sleek design.

Key Features:

  • Ultra-Quiet Operation: Operates at less than 50 dB, ensuring a peaceful environment.
  • Reverse Aerofoil Blade Design: Blades are shaped like an inverted aircraft wing to reduce turbulence and noise while maximizing airflow.
  • Energy-Efficient BLDC Pro Motor: Consumes up to 50% less energy compared to traditional induction fans, maintaining consistent speed even with voltage fluctuations.
  • Powerful Airflow: Delivers up to 260 CMM (Cubic Meters Per Minute) for effective cooling.
  • Remote Control: Offers convenient control over fan settings.
Orient Electric Aerosilent fan with less than 50dB noise level

Image: Illustration highlighting the fan's quiet operation, rated at less than 50dB.

Setup and Installation

Before beginning installation, ensure all components are present and the power supply to the installation area is disconnected at the main circuit breaker.

Included Components:

  • Motor Unit
  • Down Rod
  • Shackle Kit (Mounting Bracket)
  • Pair of Canopies
  • Set of 3 Blades
  • Remote Control
  • Pair of Batteries for Remote

Installation Steps:

  1. Safety First: Turn off power at the circuit breaker before starting any electrical work.
  2. Mounting Bracket Installation: Secure the shackle kit (mounting bracket) firmly to a ceiling joist or a fan-rated electrical box. Ensure it can support the fan's weight.
  3. Down Rod Assembly: Attach the down rod to the fan motor unit. Ensure all screws are tightened securely.
  4. Wiring Connections: Carefully connect the electrical wires from the ceiling to the fan motor unit (Live, Neutral, and Ground) according to local electrical codes.
  5. Hanging the Fan: Lift the assembled fan unit and hang it onto the installed mounting bracket.
  6. Canopy Installation: Slide the upper and lower canopies up the down rod to cover the wiring and mounting bracket, securing them in place.
  7. Blade Attachment: Attach each of the three blades to the motor housing using the provided screws. Ensure they are securely fastened and balanced.
  8. Remote Control Setup: Open the battery compartment of the remote control and insert the provided batteries, observing correct polarity.
  9. Power Restoration: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Adjustable canopy of the ceiling fan

Image: Close-up of the fan's adjustable canopy, designed for a flush ceiling fit.

Operating Instructions

Your Aerosilent fan comes with a convenient RF (Radio Frequency) remote control for easy operation from anywhere in the room.

Orient Electric Aerosilent fan remote control

Image: The RF remote control for the Orient Electric Aerosilent fan, showing various function buttons.

Remote Control Functions:

  • ON/OFF Button: Press the green 'ON' button to turn the fan on, and the red 'OFF' button to turn it off.
  • Speed Control: Use the numbered buttons (1-6) to select your desired fan speed. The fan offers 6 distinct speed settings.
  • BOOST Mode: Press the 'BOOST' button to instantly activate the maximum fan speed for rapid cooling.
  • Timer Function: Use the 'TIMER' button to set the fan to automatically turn off after 2, 4, 6, or 8 hours. Press repeatedly to cycle through the timer options.
  • Reverse Rotation: This fan features a reverse rotation mode, useful for circulating warm air in cooler months. Refer to the specific instructions provided with your remote for activating this function, as button labels may vary.
Diagram illustrating powerful airflow from the fan

Image: Visual representation of the fan's powerful and uniform airflow.

Maintenance

Regular maintenance ensures optimal performance and longevity of your ceiling fan.

Cleaning:

  • Power Off: Always ensure the fan's power supply is disconnected before cleaning.
  • Blades: Wipe the fan blades with a soft, dry, or slightly damp cloth to remove dust. Avoid using abrasive cleaners or excessive moisture.
  • Motor Housing: Clean the motor housing with a soft, dry cloth. Do not allow water to enter the motor.
  • Avoid Chemicals: Do not use harsh chemicals, solvents, or abrasive cleaning agents, as these can damage the fan's finish.

Inspection:

  • Tightness: Periodically check all screws on the blade attachments, down rod, and mounting bracket to ensure they are tight. Loose connections can cause wobbling or noise.
  • Wiring: Inspect visible wiring for any signs of wear or damage. If any issues are found, contact a qualified electrician.

Troubleshooting

If you encounter any issues with your fan, refer to the following common problems and solutions before contacting support.

ProblemPossible CauseSolution
Fan does not startNo power supply
Remote batteries dead
Incorrect wiring
Check circuit breaker and wall switch
Replace remote batteries
Verify wiring connections (consult electrician if unsure)
Fan makes excessive noiseLoose blade screws
Unbalanced blades
Loose mounting hardware
Tighten all blade screws
Check blade balance (use a balancing kit if necessary)
Ensure mounting bracket and down rod connections are secure
Remote control not workingDead batteries
Remote not paired (if applicable)
Replace batteries
Refer to remote pairing instructions in the full manual (if provided)
Low airflowIncorrect speed setting
Dust accumulation on blades
Increase fan speed using the remote
Clean fan blades regularly

Specifications

Detailed technical specifications for the Orient Electric Aerosilent 1200mm BLDC Ceiling Fan.

Internal view of the fan's BLDC motor

Image: Cutaway view of the fan's efficient BLDC motor, highlighting its copper windings.

FeatureDetail
BrandOrient Electric
Model Name1200 Aerosilent BLDC DUNE GOLD RF 260
Model Number2134884415010
ColourDune Gold
Blade Length1200 Millimetres
Number of Blades3
Motor TypeBrushless Motor (BLDC)
Wattage40 Watts
Voltage220 Volts, 240 Volts
Noise Level49.8 Decibels
Air Flow Capacity260 Cubic Meters Per Minute (CMM)
Speed280 RPM
Number of Speeds6
Controller TypeRemote Control
Special FeaturesInverter Compatible, Quiet Operation, Remote Controlled, Reverse Rotation
Product Dimensions (D x W x H)63D x 120W x 48H Centimeters
Item Weight4.3 Kilograms
Material TypeAcrylonitrile Butadiene Styrene
Country of OriginIndia

Warranty Information

Your Orient Electric Aerosilent Ceiling Fan comes with a comprehensive warranty to ensure your peace of mind.

  • Warranty Period: This product is covered by a 5-Year Warranty from the date of purchase.
  • Coverage: The warranty covers manufacturing defects and issues arising from normal use.
  • Exclusions: The warranty does not cover damage due to improper installation, misuse, unauthorized repairs, or natural wear and tear.
  • Claim Process: For warranty claims, please retain your purchase receipt and contact Orient Electric customer support.

Customer Support

For any queries, technical assistance, or service requests, please contact Orient Electric customer support.

  • Manufacturer: Orient Electric Limited
  • Address: Plot No 11, Sector 6, Faridabad, Haryana 121006, India
  • Contact Information: Please refer to the official Orient Electric website or product packaging for the most current customer service phone numbers and email addresses.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.