COMHOMA Velvet Tall Office Chair

Introduction

Thank you for choosing the COMHOMA Velvet Tall Office Chair. This chair is designed to provide a stylish and comfortable seating solution for various environments, including workspaces, vanity areas, and home offices. Its versatile design and adjustable features make it suitable for small spaces and diverse uses.

This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read it thoroughly before assembly and retain it for future reference.

Product Features

• Elegant and Thoughtful Design: This compact chair features soft Teddy fabric, upgraded double-layer padding, a comfortable low backrest, and a charming bow-shaped lumbar pillow. Its modern aesthetic adds comfort and personality to any office, bedroom, or living space.
• Comfortable and Flexible Fit: Designed for comfort and versatility, the wide adjustable seat height (45 cm - 23.6 inches) easily adapts to vanity tables, desks, bar tables, and workstations. The armless design allows it to be neatly tucked under a desk, saving space.
• Enhanced Support and Stability: The wraparound backrest is constructed from specially designed foam for superior lumbar support and a soft, comfortable feel. Combined with a sturdy U-shaped metal frame and double-layer cushion, it supports up to 350 lbs, ensuring lasting comfort and reliable stability.
• Charming and Practical: The bow-shaped pillow not only enhances lumbar support but also features hidden storage for added convenience. Lightweight and compact, this chair brightens your space while keeping it organized.
• FSC Certified: The vanity chair seat base is made from FSC-certified wood.

Package Contents

Before beginning assembly, ensure all parts and tools are present. The package should contain:

• Chair Seat with Backrest
• Base with Casters
• Gas Lift Cylinder
• Bow-shaped Lumbar Pillow
• Assembly Hardware (screws, washers, etc.)
• Assembly Tools (e.g., Allen wrench)
• Instruction Manual

If any parts are missing or damaged, please contact customer support.

Setup and Assembly

Assembly is designed to be quick and hassle-free, typically taking about 15 minutes. Follow the steps below carefully.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Casters to Base: Insert the casters into the holes on the chair base until they click securely into place.
3. Insert Gas Lift: Place the gas lift cylinder into the center hole of the chair base.
4. Attach Seat to Gas Lift: Carefully align the seat mechanism with the top of the gas lift cylinder and press down firmly until it is seated.
5. Secure Backrest: Attach the backrest to the seat using the provided screws and tools. Ensure all screws are tightened securely, but do not overtighten.
6. Attach Lumbar Pillow: Position the bow-shaped lumbar pillow on the backrest as desired. It may have a hidden storage compartment; refer to the specific instructions for its use.

An assembly video may be available for visual guidance. Refer to the product page or contact customer support for access.

Figure 1: Chair dimensions and recommended user height/weight.

Operating Instructions

Your COMHOMA chair is designed for ease of use and adaptability.

• Height Adjustment: To adjust the seat height, locate the lever under the seat on the right side. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at the desired height.
• Swivel Function: The chair seat can rotate 360 degrees, allowing for easy movement and access to your surroundings without needing to reposition the entire chair.
• Mobility: The smooth-rolling casters allow you to move the chair effortlessly across various floor surfaces. Ensure the path is clear to prevent accidents.

Figure 2: Chair height adjustment from 17.7 inches to 23.6 inches.

Maintenance

Proper care will extend the life and appearance of your chair.

• Cleaning the Fabric: For general cleaning, gently vacuum the Teddy velvet fabric to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first.
• Frame and Base: Wipe the metal frame and plastic base with a soft, damp cloth. Avoid abrasive cleaners.
• Casters: Periodically check the casters for hair or debris that may hinder smooth movement. Clean as necessary.
• Hardware: Occasionally check all screws and bolts to ensure they remain tight. Retighten if loose.

Troubleshooting

If you encounter any issues with your chair, refer to the following common problems and solutions:

Specifications

• Brand: COMHOMA
• Model Name: TM-C-H-710-NEW
• Color: White
• Material: Teddy Velvet
• Frame Material: Metal
• Product Dimensions (D x W x H): 48.3 cm x 58.4 cm x 101.6 cm (19 in x 23 in x 40 in)
• Seat Depth: 43.2 cm (17 in)
• Item Weight: 9 pounds
• Maximum Weight Recommendation: 350 pounds
• Age Range (Description): Adult
• Assembly Required: Yes
• Included Components: Casters

Figure 3: Detail of the ultra-soft Teddy fabric.

Warranty and Support

COMHOMA is committed to providing high-quality products. For warranty information, please refer to the documentation included with your purchase or visit the official COMHOMA website.

If you require assistance with assembly, have questions about product features, or need to report a missing/damaged part, please contact our customer support team:

• Email: support@comhoma.com
• Phone: [Insert Phone Number Here, if available]
• Website: COMHOMA Official Page

Please have your model number (TM-C-H-710-NEW) and purchase date ready when contacting support.