OSIDEN Rechargeable Motion Sensor Ceiling Light (Model XTD-1) User Manual

1. Introduction

Thank you for choosing the OSIDEN Rechargeable Motion Sensor Ceiling Light. This manual provides detailed instructions for the safe and efficient use of your new lighting product. Please read this manual thoroughly before installation and operation, and retain it for future reference.

2. Important Safety Instructions

To ensure safe operation, please observe the following precautions:

• Do not expose the light to extreme temperatures, direct sunlight, or high humidity.
• Do not attempt to disassemble, repair, or modify the device. This may void the warranty and pose safety risks.
• Keep the device away from water and other liquids.
• Ensure the installation surface is clean, dry, and stable before attaching the light.
• Use only the specified charging method and cable.
• The remote control requires 2 AAA batteries (not included). Ensure correct polarity when inserting batteries.

3. Package Contents

Verify that all items are present in your package:

• 4 x OSIDEN Rechargeable Motion Sensor Ceiling Lights
• 4 x USB Charging Cables
• 4 x Magnetic Mounting Kits
• 1 x Remote Control (AAA batteries not included)
• 1 x User Manual

4. Product Specifications

Figure 1: Product Dimensions and Remote Control Layout

5. Setup and Installation

5.1 Initial Charging

Before first use, fully charge the ceiling light.

1. Connect the provided USB charging cable to the charging port on the side of the light.
2. Connect the other end of the USB cable to a standard USB power adapter (not included).
3. The indicator light will show charging status (e.g., red for charging, green for fully charged).
4. Charging typically takes about 3.5 hours.

Figure 2: Charging the Ceiling Light

5.2 Remote Control Battery Installation

Insert 2 AAA batteries (not included) into the remote control, ensuring correct polarity.

5.3 Magnetic Installation

The light features a wireless magnetic installation for easy setup without wiring or drilling.

1. Choose a clean, smooth, and flat surface for installation (e.g., tile, glass, painted wall).
2. Peel off the protective film from the adhesive side of the magnetic mounting plate.
3. Firmly press the magnetic plate onto the desired surface and hold for a few seconds to ensure adhesion.
4. Align the ceiling light with the magnetic plate. The light will securely attach magnetically.
5. The detachable body allows for easy removal for charging.

Figure 3: Magnetic Installation Process

6. Operating Instructions

The OSIDEN ceiling light can be controlled via its integrated button or the remote control.

6.1 On-Device Controls

Figure 4: On-Device Controls

• Switch Button: Long press to turn ON/OFF. Short press to cycle through operating modes (Day Mode, Night Mode, Constant Light Mode).
• Color Temperature and Brightness Adjustment Buttons: Long press to infinitely dim the brightness (10%-100%). Short press to adjust the color temperature (3500K/4500K/6000K).
• Dip Switch: Adjusts the induction light-up time (e.g., 15s, 30s, 60s) for motion sensor modes.

6.2 Remote Control Functions

The remote control provides convenient access to all light settings.

Figure 5: Remote Control Functions

• Power Button (ON/OFF): Turns the light on or off.
• Day Mode: Activates motion detection 24/7.
• Night Mode: Activates motion detection only in dark environments.
• Always On Mode: Keeps the light continuously lit.
• Brightness +/-: Adjusts the brightness level (10%-100%).
• Color Temperature Switching: Cycles through 3500K, 4500K, and 6000K.
• Timer Button (30 min): Sets the light to turn off automatically after 30 minutes.

6.3 Motion Sensor Operation

The highly sensitive motion sensor detects movement within a 10-18 foot range and a 120° detection angle.

Figure 6: Motion Sensor Detection Area and Modes

• Day Mode: The light will activate upon detecting motion regardless of ambient light conditions.
• Night Mode: The light will only activate upon detecting motion when the ambient environment is dark.
• Constant Light Mode: The motion sensor is deactivated, and the light remains continuously on until manually turned off or the battery depletes.

6.4 Brightness and Color Temperature Adjustment

Figure 7: Brightness and Color Temperature Options

You can customize the lighting to suit your preference:

• Color Temperature: Choose between 3500K (warm white), 4500K (natural white), or 6000K (cool white) using the remote or on-device button.
• Brightness: Adjust the light intensity from 10% to 100% using the remote or by long-pressing the on-device adjustment button.

6.5 Timer Function

The remote control includes a 30-minute timer function.

Figure 8: Timer Function in Use

Press the timer button on the remote to activate a 30-minute countdown, after which the light will automatically turn off.

7. Maintenance

7.1 Cleaning

• Ensure the light is off before cleaning.
• Wipe the surface with a soft, dry, or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals.

7.2 Charging

• Recharge the light when the brightness appears dim or the indicator light signals low battery.
• Regular charging helps maintain battery health.

8. Troubleshooting

If you encounter issues, refer to the following table for common problems and solutions:

9. Warranty Information

No specific manufacturer warranty description was provided in the product data. Please refer to your purchase documentation or contact the seller for details regarding warranty coverage.

10. Customer Support

If you have any questions, concerns, or require assistance with your OSIDEN Rechargeable Motion Sensor Ceiling Light, please contact the seller or manufacturer through the platform where you purchased the product. Provide your model number (XTD-1) and a detailed description of the issue for faster service.