1. Product Overview
The GAMDIAS Atlas P6 CG is a mid-tower gaming PC case designed for Mini-ITX, Micro-ATX, and ATX motherboards. It features a curved tempered glass panoramic design, four pre-installed 120mm PWM ARGB fans, and supports GPUs up to 425mm in length. The case emphasizes high airflow, modularity, and tool-free access for an enhanced building and display experience.
- Curved Panoramic Tempered Glass: Showcases internal components with a seamless view.
- High Airflow Cooling Design: Optimized ventilation for efficient heat dissipation.
- 4 Pre-Installed ARGB Fans: Provides balanced airflow and customizable lighting.
- Spacious Interior: Accommodates high-end GPUs (up to 425mm) and offers ample cable management room.
- Modern Connectivity: Includes a front panel USB Type-C port for fast data transfer.
2. Setup and Installation
2.1 Preparing the Case
Before installing components, ensure the case is placed on a stable, flat surface. Remove the tempered glass panels carefully. The right-side tempered glass panel features a simple clasp mechanism for tool-free access.
2.2 Motherboard Installation
The Atlas P6 CG supports Mini-ITX, Micro-ATX, and ATX motherboards. Install the necessary standoffs for your motherboard size. Secure the motherboard using screws.
2.3 GPU Installation
Install your graphics card into the appropriate PCIe slot on your motherboard. The case includes a highly adjustable GPU support bracket to prevent sag and accommodate various card sizes. Adjust the bracket's height and arm to fit your GPU.
The case features individually removable PCIe slot covers for flexible upgrades and improved airflow. These covers are designed for reusability.
2.4 Storage Device Installation
The Atlas P6 CG supports installation of up to two 3.5" drives and one 2.5" drive, or one 3.5" drive and two 2.5" drives. Install your HDDs/SSDs into the designated bays. The case can accommodate PSUs up to 200mm in length.
2.5 Cable Management
Utilize the 90mm routing depth and integrated Velcro straps behind the motherboard tray for organized cable management. This helps maintain optimal airflow and a clean build appearance. The case supports connector-hidden motherboards (BTF) for a cleaner front appearance.
3. Operating Instructions
3.1 Powering On and I/O Ports
Connect your power supply to the wall outlet and turn on your PC. The front I/O panel provides convenient access to essential ports:
- One USB 3.2 Gen 2x2 Type-C port (up to 20 Gbps)
- Two USB 3.0 ports
- Fan LED control button
- Spotlight switch
- Integrated audio jack
3.2 ARGB Lighting Control
The four pre-installed ARGB fans and dual ARGB light strips can be controlled via the front panel LED control button or synchronized with compatible motherboards for unified RGB customization. The top light strip automatically illuminates when the top panel is installed via a gold finger connection.
The case includes an 8-port PWM ARGB fan hub for easy management and synchronization of the fans.
3.3 Figure Display Stage
The dedicated figure display stage with an omni-directional spotlight allows you to highlight collectible figures within your PC build. Use the spotlight switch on the front I/O panel to control its illumination.
4. Maintenance
4.1 Dust Filter Cleaning
The Atlas P6 CG is equipped with magnetic dust filters on the top, side, and bottom to protect components from dust accumulation while maintaining airflow. Regularly remove and clean these filters to ensure optimal cooling performance.
4.2 General Cleaning
Use a soft, dry cloth to clean the exterior surfaces of the case, including the tempered glass panels. For internal cleaning, use compressed air to remove dust from components and fan blades. Ensure the PC is powered off and unplugged before performing any internal cleaning.
5. Troubleshooting
- No Power:
Ensure the power supply is properly connected to the wall outlet and the motherboard. Check all internal power cables (24-pin ATX, CPU, GPU, etc.) are securely seated.
- Fans Not Spinning/ARGB Not Lighting Up:
Verify that all fan and ARGB cables are correctly connected to the fan hub and the motherboard. Check the fan LED control button on the front panel. Ensure the fan hub is receiving power.
- Poor Airflow/High Temperatures:
Clean all dust filters and internal components. Ensure fans are oriented correctly for optimal airflow (intake/exhaust). Check for any obstructions blocking air pathways.
- Front Panel USB/Audio Not Working:
Confirm that the front panel I/O cables (USB 3.0, USB Type-C, HD Audio) are correctly connected to the corresponding headers on your motherboard.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | GAMDIAS |
| Model Name | ATLAS P6 CG |
| Case Type | Mid Tower |
| Motherboard Compatibility | Mini-ITX, Micro-ATX, ATX |
| Material | Alloy Steel |
| Cooling Method | Air |
| Pre-installed Fans | 4x 120mm PWM ARGB Fans |
| Max GPU Length | 425mm |
| Max Air Cooler Height | 165mm |
| PSU Length Support | Up to 200mm |
| Storage Bays | 2x 3.5" + 1x 2.5" or 1x 3.5" + 2x 2.5" |
| Front I/O Ports | 1x USB 3.2 Gen 2x2 Type-C, 2x USB 3.0, Fan LED Control, Spotlight Switch, Audio Jack |
| Special Features | Curved Tempered Glass, ARGB Lighting, Tool-Free Design, Type-C Port, Cable Management, Figure Display Stage |
| Item Weight | 16 pounds |
| UPC | 848475013169 |
7. Warranty Information
The GAMDIAS Atlas P6 CG PC case comes with a 1 Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official GAMDIAS website or contact their customer support.
8. Customer Support
For further assistance, technical support, or inquiries regarding your GAMDIAS Atlas P6 CG PC case, please visit the official GAMDIAS website or contact their customer service department. Contact information can typically be found on the manufacturer's website.
9. Product Video
Watch the official product video for a visual guide on the GAMDIAS Atlas P6 CG Mid-Tower Case features.
